Nordtank NTK 500/41

The wind turbine NTK 500/41 is a production of Nordtank Energy Group , a manufacturer from Denmark. Nordtank Energy Group is no longer active. The manufacturer was taken over by NEG Micon A/S.

The rated power of Nordtank NTK 500/41 is 500,00 kW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the Nordtank NTK 500/41 is 41,0 m. The rotor area amounts to 1.325,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 27,0 U/min.

The Nordtank NTK 500/41 is fittet with a spur/planetary gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Flender.

In the generator, Nordtank Energy Group sets to Asynchronus. The manufacturer has used one generator for the NTK 500/41. The maximum speed of the generator is 1.500,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the NTK 500/41 is at 50,0 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Nordtank focuses on painted. Manufacturer of the tower is Nordtank.

We have 15 pictures of this wind turbine. One model has been entered to the wind turbine. This is the Nordtank NTK 500/41 - Fair model. Power data for the NTK 500/41 of Nordtank are not stored in the system.

The Nordtank NTK 500/41 has been listed since 20.01.2013. The last modification of the master data was made on 12.03.2023.