Nordtank NTK 45

45,00 kW Small wind turbine
  • ✘ Power data
  • ✔ 28 Pictures
  • ✘ Models

Datasheet

Power

Rated power:
45.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.7 m/s
Rated wind speed:
17.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
54.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-

Rotor

Diameter:
15.7 m
Swept area:
201.0 m²
Number of blades:
3
Rotor speed, max:
-
Tipspeed:
-
Type:
-
Material:
GFRP
Manufacturer:
Økær
Power density 1:
223.9 W/m²
Power density 2:
4.5 m²/kW

Gear box

Type:
spur
Stages:
-
Ratio:
-
Manufacturer:
-

Generator

Type:
induction
Number:
2
Speed, max:
1,500.0 U/min
Voltage:
400.0 V
Grid connection:
thyristors
Grid frequency:
50 Hz
Manufacturer:
-

Tower

Hub height:
22.7 / 24.0 m
Type:
steel tube
Shape:
conical
Corrosion protection:
Hot-dip galvanized
Manufacturer:
Nordtank

Weight

Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
12.0 t

Miscellaneous

Installation:
-
Offshore:
No
Onshore:
Yes

Power curve

There are no power data deposited for this turbine.

Marketplace

powered by wind-turbine.com

Service company for Nordtank NTK 45

Dismantling of wind power plants

Companies for deconstruction

Further operation

Find transport for wind energy

Crane & Tower Crane

Companies for further operation

Models

There are no models to this Windturbine.

Description

The wind turbine NTK 45 is a production of Nordtank Energy Group , a manufacturer from Denmark. Nordtank Energy Group is no longer active. The manufacturer was taken over by NEG Micon A/S.

The rated power of Nordtank NTK 45 is 45,00 kW. At a wind speed of 3,7 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Nordtank NTK 45 is 15,7 m. The rotor area amounts to 201 m². The wind turbine is equipped with 3 rotor blades.

The Nordtank NTK 45 is fittet with a spur gearbox.

In the generator, Nordtank Energy Group sets to induction. The manufacturer has used 2 generators for the NTK 45. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 400 V. At the mains frequency, the NTK 45 is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Nordtank focuses on Hot-dip galvanized. Manufacturer of the tower is Nordtank.

We have 28 pictures of this wind turbine. There are no models for this wind turbine. Power data for the NTK 45 of Nordtank are not stored in the system.

The Nordtank NTK 45 has been listed since 27.07.2012. The last modification of the master data was made on 30.09.2021.

More wind turbines

Nordtank NTK 160
160,00 kW
Nordtank NTK 99
99,00 kW
Nordtank NTK 200
200,00 kW
Nordtank NTK 130
130,00 kW
Nordtank NTK 500/41
500,00 kW
Nordtank NTK 1500 60
1,50 MW
Nordtank NTK 22
22,00 kW
Nordtank NTK 10
10,00 kW
Nordtank NTK 300
300,00 kW
Nordtank NTK 150
150,00 kW
Nordtank NTK 55
55,00 kW
Nordtank NTK 65
65,00 kW
Nordtank NTK 600 Nearshore
600,00 kW
Nordtank NTK 330
330,00 kW
Nordtank NTK 450
450,00 kW
Nordtank NTK 30
30,00 kW
Nordtank NTK 500/37
500,00 kW
Nordtank NTK 600
600,00 kW
Nordtank NTK 10 Prototyp
10,00 kW
Nordtank NTK 400
400,00 kW