Nordtank NTK 150

The wind turbine NTK 150 is a production of Nordtank Energy Group , a manufacturer from Denmark. Nordtank Energy Group is no longer active. The manufacturer was taken over by NEG Micon A/S.

The rated power of Nordtank NTK 150 is 150,00 kW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the Nordtank NTK 150 is 24,6 m. The rotor area amounts to 475,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 37,0 U/min.

The Nordtank NTK 150 is fittet with a Spur gearbox. The gearbox has 2,0 stages. Manufacturer of the transmission is Flender.

In the generator, Nordtank Energy Group sets to Asynchronus. The manufacturer has used one generator for the NTK 150. The maximum speed of the generator is 1.520,0 U/min. The voltage amounts to 400,0 V. At the mains frequency, the NTK 150 is at 50,0 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Nordtank focuses on epoxy painted or galvanized. Manufacturer of the tower is Nordtank.

We have 127 pictures of this wind turbine. Two models has been entered to this wind turbine. There are the models Nordtank NTK 150 - Fair model and Nordtank NTK 150 - Own building model. We have power data on the NTK 150 from the Nordtank in the system. You can see the powercurve in the diagram above.

The Nordtank NTK 150 has been listed since 27.07.2012. The last modification of the master data was made on 12.03.2023.