Nordtank NTK 160

The wind turbine NTK 160 is a production of Nordtank Energy Group , a manufacturer from Denmark. Nordtank Energy Group is no longer active. The manufacturer was taken over by NEG Micon A/S.

The rated power of Nordtank NTK 160 is 160,00 kW. At a wind speed of 4 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Nordtank NTK 160 is 24,6 m. The rotor area amounts to 475 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 37 U/min.

The Nordtank NTK 160 is fittet with a spur gearbox. The gearbox has 2 stages. Manufacturer of the transmission is Flender.

In the generator, Nordtank Energy Group sets to induction. The manufacturer has used one generator for the NTK 160. The maximum speed of the generator is 1.520 U/min. The voltage amounts to 400 V. At the mains frequency, the NTK 160 is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Nordtank focuses on painted/galvanized. Manufacturer of the tower is Nordtank.

There is one picture of the wind turbine NTK 160. There are no models for this wind turbine. Power data for the NTK 160 of Nordtank are not stored in the system.

The Nordtank NTK 160 has been listed since 25.04.2016. The last modification of the master data was made on 25.04.2016.