Tacke TW 500
- ✔ Power data
- ✔ 28 Pictures
- ✘ Models
Spare parts for Tacke TW 500
The rated power of Tacke TW 500 is 500,00 kW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Tacke TW 500 is 36,0 m. The rotor area amounts to 1.015 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 31 U/min.
The Tacke TW 500 is fittet with a Spur gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Flender.
In the generator, Tacke Windtechnik GmbH & Co. KG sets to induction. The manufacturer has used one generator for the TW 500. The maximum speed of the generator is 1.515,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the TW 500 is at 50,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Tacke focuses on painted.
We have 28 pictures of this wind turbine. There are no models for this wind turbine. We have power data on the TW 500 from the Tacke in the system. You can see the powercurve in the diagram above.
The Tacke TW 500 has been listed since 16.03.2014. The last modification of the master data was made on 03.07.2017.