Tacke TW 45
- ✔ Power data
- ✘ Pictures
- ✘ Models
The rated power of Tacke TW 45 is 45,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.
The rotor diameter of the Tacke TW 45 is 12,5 m. The rotor area amounts to 122,7 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 72 U/min.
The Tacke TW 45 is fittet with a spur gearbox. Manufacturer of the transmission is Renk.
In the generator, Tacke Windtechnik GmbH & Co. KG sets to induction. The manufacturer has used one generator for the TW 45. The voltage amounts to 380 V. At the mains frequency, the TW 45 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Tacke focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the TW 45 from the Tacke in the system. You can see the powercurve in the diagram above.
The Tacke TW 45 has been listed since 03.02.2016. The last modification of the master data was made on 03.02.2016.