AN Bonus 150/30

150,00 kW
  • ✔ Power data
  • ✔ 33 Pictures
  • ✘ Models



Rated power:150.0 kW
Flexible power ratings:-
Cut-in wind speed:3.5 m/s
Rated wind speed:12.5 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:57.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:23.0 m
Swept area:415.0 m²
Number of blades:3
Rotor speed, max:40.0 U/min
Tipspeed:48 m/s
Type:LM 11 H
Manufacturer:LM Glasfieber
Power density 1:361.4 W/m²
Power density 2:2.8 m²/kW

Gear box



Speed, max:1,000.0 U/min
Voltage:400.0 V
Grid connection:Thyristor
Grid frequency:50 Hz


Hub height:30/40 m
Type:Steel tube/Lattice
Corrosion protection:-
Manufacturer:Roug / KGW


Single blade:0.7 t
Nacelle:8.7 t
Tower, max:22.0 t
Total weight:-



Power curve


1x AN Bonus 600/44 MK IV
used, 42m Sweden
2x AN Bonus 450/37
used, Year 1997, 33m
3x AN Bonus 450/37
used, Year 1995, 40m
6x AN Bonus 450/37
used, 42m
1x AN Bonus 600/44 MK IV
used, 42m
2x AN Bonus 450/37
used, 33m Spain
1x AN Bonus 600/44 MK IV
used, 42m
2x AN Bonus 450/37
€ 40.000
11x AN Bonus 600/41
used, Year 1996, 55m
4x AN Bonus 600/41
used, Year 2000
€ 100.000
8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
5x Bonus B23/150 Gittermast
used, Year 1993, 30m Germany
25x Bonus B23/150 Gittermast
used, Year 1995, 25m
10x Wind World W2800/150
used, 30m France
€ 30.000
powered by

Service company for AN Bonus 150/30


There are no models to this Windturbine.


The wind turbine 150/30 is a production of AN Wind Energie GmbH, a manufacturer from Germany. Since year 2005, AN Wind Energie GmbH is no longer active. The manufacturer was taken over by Siemens Wind Power A/S.

The rated power of AN Bonus 150/30 is 150,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the AN Bonus 150/30 is 23 m. The rotor area amounts to 415 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 40 U/min.

The AN Bonus 150/30 is fittet with a Spur gearbox. The gearbox has 2 stages. Manufacturer of the transmission is Flender.

In the generator, AN Wind Energie GmbH sets to Asynchronus. The manufacturer has used one generator for the 150/30. The maximum speed of the generator is 1.000 U/min. The voltage amounts to 400 V. At the mains frequency, the 150/30 is at 50 Hz.

In the construction of the tower, the manufacturer uses Steel tube/Lattice. Manufacturer of the tower is Roug / KGW.

We have 33 pictures of this wind turbine. There are no models for this wind turbine. We have power data on the 150/30 from the AN Bonus in the system. You can see the powercurve in the diagram above.

The AN Bonus 150/30 has been listed since 17.03.2012. The last modification of the master data was made on 26.09.2017.

More wind turbines

AN Bonus 600/44-3
600,00 kW
AN Bonus 750/50 Prototype
750,00 kW
AN Bonus 600/41
600,00 kW
AN Bonus 450/35
450,00 kW
AN Bonus 300/33
300,00 kW
AN Bonus 450/36
450,00 kW
AN Bonus 1000/54
1,00 MW
AN Bonus 450/37
450,00 kW
AN Bonus 600/44 MK IV
600,00 kW
AN Bonus 2000/76
2,00 MW
AN Bonus 1300/62
1,30 MW
AN Bonus 100/30
100,00 kW
AN Bonus 600/44
600,00 kW
AN Bonus 2300/82
2,30 MW
1,50 MW
NEG Micon NM 110/4200
4,20 MW
Senvion 3.4M140
3,40 MW
Tozzi Green Victory 19-20
19,90 kW
Micon M 1100-600
600,00 kW
TYHI - Taiyuan TZ3000/113
3,00 MW