AN Bonus 600/44

600,00 kW
  • ✘ Power data
  • ✔ 13 Pictures
  • ✔ 1 Model

Datasheet

Power

Rated power:600.0 kW
Cut-in wind speed:3.0 m/s
Rated wind speed:15.0 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:60.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-

Rotor

Diameter:44.0 m
Swept area:1,520.0 m²
Number of blades:3
Rotor speed, max:27.0 U/min
Tipspeed:62 m/s
Type:LM 19.1
Material:GFK
Manufacturer:LM Glasfieber/Bonus
Power density 1:394.7 W/m²
Power density 2:2.5 m²/kW

Gear box

Type:spur/planetary
Stages:3.0
Ratio:1:56
Manufacturer:Flender

Generator

Type:Asynchronus
Number:1
Speed, max:1,500.0 U/min
Voltage:690.0 V
Grid connection:Thyristor
Grid frequency:50 Hz
Hersteller:ABB

Tower

Hub height:42/50/55/58 m
Type:Steel tube
Shape:conical
Corrosion protection:coated
Manufacturer:Roug/KGW/SSC

Weight

Single blade:3.2 t
Hub:-
Rotor:9.5 t
Nacelle:24.0 t
Tower, max:51.0 t
Total weight:-

Miscellaneous

Installation:-
Offshore:No
Onshore:Yes

Power curve

There are no power data deposited for this turbine.

Marketplace

1x AN Bonus 600/44 MK IV
used, 42m Sweden
2x AN Bonus 150/30
used, Year 1990, 30m Poland
4x AN Bonus 150/30
used, 30m Germany
2x AN Bonus 450/37
used, Year 1997, 33m
3x AN Bonus 450/37
used, Year 1995, 40m
6x AN Bonus 450/37
used, 42m
1x AN Bonus 150/30
used
€ 41.000
1x AN Bonus 1000/54
used
€ 140.000
1x AN Bonus 150/30
used
€ 43.000
3x AN Bonus 150/30
used
€ 44.000
1x AN Bonus 150/30
used
€ 44.000
3x AN Bonus 150/30
used, 30m
€ 44.000
3x AN Bonus 150/30
new, Year 1991, 30m Poland
€ 37.000
1x AN Bonus 600/44 MK IV
used, 42m
2x AN Bonus 450/37
used, 33m Lithuania
2x AN Bonus 450/37
used, 33m Spain
1x AN Bonus 450/37
used, Year 1994, 42m Germany
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
2x NEG Micon NM 48/600
used, Year 2001, 45m Netherlands
1x Enercon E-40/6.44
used, Year 2001, 48m
powered by wind-turbine.com

Models

AN Bonus 600/44
Desk

Description

The wind turbine 600/44 is a production of AN Wind Energie GmbH, a manufacturer from Germany. Since year 2005, AN Wind Energie GmbH is no longer active. The manufacturer was taken over by Siemens Wind Power A/S.

The rated power of AN Bonus 600/44 is 600,00 kW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the AN Bonus 600/44 is 44,0 m. The rotor area amounts to 1.520 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 27 U/min.

The AN Bonus 600/44 is fittet with a spur/planetary gearbox. The gearbox has 3 stages. Manufacturer of the transmission is Flender.

In the generator, AN Wind Energie GmbH sets to Asynchronus. The manufacturer has used one generator for the 600/44. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 690 V. At the mains frequency, the 600/44 is at 50 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower AN Bonus focuses on coated. Manufacturer of the tower is Roug/KGW/SSC.

We have 13 pictures of this wind turbine. One model has been entered to the wind turbine. This is the AN Bonus 600/44 - Desk model. Power data for the 600/44 of AN Bonus are not stored in the system.

The AN Bonus 600/44 has been listed since 25.11.2012. The last modification of the master data was made on 07.03.2013.

More wind turbines

AN Bonus 450/35
450,00 kW
AN Bonus 100/30
100,00 kW
AN Bonus 300/33
300,00 kW
AN Bonus 2000/76
2,00 MW
AN Bonus 600/44 MK IV
600,00 kW
AN Bonus 450/36
450,00 kW
AN Bonus 750/50 Prototype
750,00 kW
AN Bonus 2300/82
2,30 MW
AN Bonus 600/41
600,00 kW
AN Bonus 600/44-3
600,00 kW
AN Bonus 150/30
150,00 kW
AN Bonus 1300/62
1,30 MW
AN Bonus 1000/54
1,00 MW
AN Bonus 450/37
450,00 kW
Nordtank NTK 30
30,00 kW
Micon M 450
200,00 kW
Goldwind GW 100/2500
2,50 MW
Vestas V52
850,00 kW
RG Wind turbina eolica
60,00 kW
aerodyn SCD 3.5/100 nearshore
3,50 MW