TURBOWINDS T600-48

600,00 kW
  • ✔ Power data
  • ✔ 13 Pictures
  • ✘ Models

Datasheet

Power

Rated power:600.0 kW
Flexible power ratings:-
Cut-in wind speed:3.0 m/s
Rated wind speed:12.5 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:60.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-

Rotor

Diameter:48.0 m
Swept area:1,810.0 m²
Number of blades:3
Rotor speed, max:23.0 U/min
Tipspeed:58 m/s
Type:DU97-W-300. DU91-W2-250 FFA-W3-211. NACA63418
Material:GRP
Manufacturer:-
Power density 1:331.5 W/m²
Power density 2:3.0 m²/kW

Gear box

Type:spur/planetary
Stages:3.0
Ratio:-
Manufacturer:-

Generator

Type:Asynchronus
Number:1
Speed, max:1,500.0 U/min
Voltage:690.0 V
Grid connection:Thyristor
Grid frequency:50 Hz
Manufacturer:-

Tower

Hub height:50 /60 m
Type:Steel tube
Shape:conical
Corrosion protection:painted
Manufacturer:-

Weight

Single blade:-
Hub:-
Rotor:-
Nacelle:35.0 t
Tower, max:61.0 t
Total weight:96.0 t

Miscellaneous

Installation:-
Offshore:No
Onshore:Yes

Power curve

Marketplace

10x TURBOWINDS T400-34
used, Year 2011, 34m
1x AN Bonus 600/44 MK IV
used, 42m Sweden
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
1x Enercon E-40/6.44
used, Year 2001, 48m
1x Bonus B44/600
used, Year 1998, 40m Netherlands
5x Nordtank NTK 600
used, Year 1995, 43m Poland
3x Enercon E-40/6.44
used, Year 2003, 78m Germany
€ 182.500
1x Made - Endesa AE-45
used, 41m Spain
€ 70.000
10x Gamesa G44
used, 80m Germany
€ 53.454
2x Jacobs 48/600
used, Year 2003, 65m Germany
1x NEG Micon NM 48/600
used, Year 1998, 40m
2x NEG Micon NM 48/600
used, Year 2001, 45m Netherlands
€ 49.500
1x Enercon E-40/6.44
used, Year 1999, 65m Germany
€ 110.000
4x Bonus B44/600
used, Year 1999, 1m
3x Bonus B44/600
used, Year 1999, 58m Ukraine
1x Vestas V39-600
used, Year 2010, 45m India
1x Jacobs 43/600
used, Year 1999, 60m Germany
€ 25.000
1x Enercon E-40/6.44
used, Year 1999, 65m Germany
€ 26.000
powered by wind-turbine.com

Service company for TURBOWINDS T600-48

Models

There are no models to this Windturbine.

Description

The wind turbine T600-48 is a production of TURBOWINDS SA/NV, a manufacturer from Belgium. This manufacturer has been in business since 1985. Since year 2018, TURBOWINDS SA/NV is no longer active. The manufacturer was taken over by DS-wind.

The rated power of TURBOWINDS T600-48 is 600,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the TURBOWINDS T600-48 is 48 m. The rotor area amounts to 1.810 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 23 U/min.

The TURBOWINDS T600-48 is fittet with a spur/planetary gearbox. The gearbox has 3 stages.

In the generator, TURBOWINDS SA/NV sets to Asynchronus. The manufacturer has used one generator for the T600-48. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 690 V. At the mains frequency, the T600-48 is at 50 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower TURBOWINDS focuses on painted.

We have 13 pictures of this wind turbine. There are no models for this wind turbine. We have power data on the T600-48 from the TURBOWINDS in the system. You can see the powercurve in the diagram above.

The TURBOWINDS T600-48 has been listed since 28.06.2012. The last modification of the master data was made on 11.05.2013.

More wind turbines

TURBOWINDS T100-10
100,00 kW
TURBOWINDS T300-28
300,00 kW
TURBOWINDS T500-48
500,00 kW
TURBOWINDS TML25
25,00 kW
TURBOWINDS V8 VAWT prototype
13,00 kW
TURBOWINDS T400-34
400,00 kW
Windey WD25-250
250,00 kW
India Wind Power IWPL-29/250
250,00 kW
Zephyros Z72
2,00 MW
WindMaster / HMZ WM 750
750,00 kW
WindMaster / HMZ WM 1300
1,30 MW
WEG Wind EnergyGroup prototypes
-
Avantis AV 1010
2,30 MW
Siemens SWT-3.3-130
3,30 MW
Newinco 25 PI 250
250,00 kW
Rago Furba 59/23.2
59,00 kW
Ventimotor 50 kW testturbine
50,00 kW
Jacobs 43/600
600,00 kW
Enercon E-15
55,00 kW
GE General Electric GE 1.85 - 87
1,85 MW