JSW Japan Steel Work J82-2.0D
2,00
MW
- ✘ Power data
- ✔ 1 Picture
- ✘ Models
Pictures
Datasheet
Power
Rated power:
2,000.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.5 m/s
Rated wind speed:
13.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
70.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
Ia, IIa
Rotor
Diameter:
83.3 m
Swept area:
5,450.0 m²
Number of blades:
3
Rotor speed, max:
19.0 U/min
Tipspeed:
83 m/s
Type:
APX70
Material:
GFRE
Manufacturer:
Aerpac
Power density 1:
367.0 W/m²
Power density 2:
2.7 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
Permanent magnet Multi-pole synchronous
Number:
1
Speed, max:
19.0 U/min
Voltage:
660.0 V
Grid connection:
AC-DC-AC Full converter
Grid frequency:
50/60 Hz
Manufacturer:
-
Tower
Hub height:
70 / 77 m
Type:
steel tube
Shape:
conical
Corrosion protection:
coated
Manufacturer:
Japan Steel Works
Weight
Single blade:
6.5 t
Hub:
22.7 t
Rotor:
42.0 t
Nacelle:
30.0 t
Tower, max:
160.0 t
Total weight:
230.0 t
Miscellaneous
Installation:
2007
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
2x Gamesa G87
used, Year 2005, 78m Spain
1x Vestas V80 Offshore
used, Year 2014, 100m Poland
€ 24
2x Vestas V80 Offshore
used, Year 2001, 80m Germany
1x Vestas V90
used Bulgaria
6x Vestas V80 Offshore
used, 110m Germany
1x Vestas V80 Offshore
used, 78m Poland
5x Vestas V90
used, Year 2004, 78m Germany
€ 325.000
4x Vestas V80 Offshore
used Poland
5x Vestas V80 Offshore
used, Year 2002, 100m Germany
2x Vestas V80 Offshore
used, Year 2003, 100m Germany
1x Bonus B76/2000
used, Year 1995, 60m
6x Vestas V80 Offshore
used Moldova
1x Vestas V90
used, 105m Poland
1x Vestas V90
used, Year 2004, 80m Germany
1x Vestas V80 Offshore
used, 100m Germany
3x Vestas V80 Offshore
used, 78m Poland
4x Vestas V80 Offshore
used, Year 2005, 100m Germany
1x Vestas V90
used, 78m Ukraine
3x Vestas V80 Offshore
used Poland
€ 410.000
1x Vestas V80 Offshore
used
powered by wind-turbine.com
Service company for JSW Japan Steel Work J82-2.0D
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine J82-2.0D is a production of JSW Japan Steel Works, LTD, a manufacturer from Japan. Since year 2019, JSW Japan Steel Works, LTD is no longer active.
The rated power of JSW Japan Steel Work J82-2.0D is 2,00 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the JSW Japan Steel Work J82-2.0D is 83,3 m. The rotor area amounts to 5.450 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19 U/min.
The JSW Japan Steel Work J82-2.0D is fittet with a direct drive gearbox.
In the generator, JSW Japan Steel Works, LTD sets to Permanent magnet Multi-pole synchronous. The manufacturer has used one generator for the J82-2.0D. The maximum speed of the generator is 19 U/min. The voltage amounts to 660 V. At the mains frequency, the J82-2.0D is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower JSW Japan Steel Work focuses on coated. Manufacturer of the tower is Japan Steel Works.
There is one picture of the wind turbine J82-2.0D. There are no models for this wind turbine. Power data for the J82-2.0D of JSW Japan Steel Work are not stored in the system.
The JSW Japan Steel Work J82-2.0D has been listed since 18.05.2023.
The rated power of JSW Japan Steel Work J82-2.0D is 2,00 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the JSW Japan Steel Work J82-2.0D is 83,3 m. The rotor area amounts to 5.450 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19 U/min.
The JSW Japan Steel Work J82-2.0D is fittet with a direct drive gearbox.
In the generator, JSW Japan Steel Works, LTD sets to Permanent magnet Multi-pole synchronous. The manufacturer has used one generator for the J82-2.0D. The maximum speed of the generator is 19 U/min. The voltage amounts to 660 V. At the mains frequency, the J82-2.0D is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower JSW Japan Steel Work focuses on coated. Manufacturer of the tower is Japan Steel Works.
There is one picture of the wind turbine J82-2.0D. There are no models for this wind turbine. Power data for the J82-2.0D of JSW Japan Steel Work are not stored in the system.
The JSW Japan Steel Work J82-2.0D has been listed since 18.05.2023.
More wind turbines
JSW Japan Steel Work J82-2.0
2,00 MW
JSW Japan Steel Work J70
1,50 MW
JSW Japan Steel Work J100-2.7
2,70 MW
Nordtank NTK 45
45,00 kW
TYHI - Taiyuan TZ1500/82
1,50 MW
WESPA 200/31
200,00 kW
ACSA LMW-10.000
10,00 kW
Windey WD77-1500
1,50 MW
Südwind S-46
750,00 kW
HEAG HW1-780
780,00 kW
Solid Wind SWP-19.8
19,80 kW
Fuhrländer LLC WTU2.5-90
2,50 MW
Windey WD110-2000
2,00 MW
Qreon Q82
2,00 MW
Enercon E-82 E3 3.000
3,00 MW
Vestas V63
1,50 MW
Henning Friis Jensen Mølle
4,00 kW
SkyWolf Wind Solar Hybrid
3,50 kW
MHI Vestas Offshore V164-9.5 MW
9,50 MW
Enercon E-30
300,00 kW