Windtec WT650
600,00
kW
- ✘ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
600.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.5 m/s
Rated wind speed:
11.0 m/s
Cut-out wind speed:
20.0 m/s
Survival wind speed:
52.5 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
50.0 m
Swept area:
1,963.0 m²
Number of blades:
3
Rotor speed, max:
27.0 U/min
Tipspeed:
71 m/s
Type:
LM24
Material:
Glass fiber reinforced epoxy
Manufacturer:
LM Glasfiber A/S
Power density 1:
305.7 W/m²
Power density 2:
3.3 m²/kW
Gear box
Type:
spur/planetary
Stages:
3.0
Ratio:
1:75
Manufacturer:
Eickhoff
Generator
Type:
Double fed induction
Number:
1
Speed, max:
2,000.0 U/min
Voltage:
690.0 V
Grid connection:
inverters
Grid frequency:
50 Hz
Manufacturer:
Weier
Tower
Hub height:
47/65 m
Type:
steel tube
Shape:
conical
Corrosion protection:
painted
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
7.5 t
Nacelle:
28.0 t
Tower, max:
68.0 t
Total weight:
105.0 t
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
5x Windtec WT1570
new, Year 2021, 233m Guinea
€ 350.000
4x Bonus B44/600
used, Year 1999, 1m Spain
1x Enercon E-40/6.44
used Germany
1x Jacobs 43/600
used, Year 1998, 60m Poland
€ 28.000
2x NEG Micon NM 48/600
used, Year 1998
1x Enercon E-40/6.44
used, Year 2001, 48m
1x Vestas V39-600
used, Year 2010, 45m India
1x Jacobs 43/600
used, Year 1999, 60m Germany
€ 25.000
1x Enercon E-40/6.44
used, Year 1999, 65m Germany
€ 26.000
1x Enercon E-40/6.44
used, Year 2003, 77m Lithuania
€ 110.000
7x Enercon E-40/6.44
used, Year 2002, 78m
1x Enercon E-40/6.44
used, 50m Germany
3x Enercon E-40/6.44
used, Year 2003, 78m Germany
€ 182.500
5x Nordtank NTK 600
used, Year 1995, 43m Poland
10x Gamesa G44
used, 80m Germany
€ 53.454
1x Enercon E-40/6.44
used, 64m
1x Bonus B44/600
used, 42m Poland
€ 50.000
2x TURBOWINDS T600-48
used, Year 2005, 65m Canada
€ 534.540
2x NEG Micon NM 48/600
used, Year 2001, 45m Netherlands
€ 49.500
1x Enercon E-40/6.44
used, Year 1999, 65m Germany
€ 110.000
powered by wind-turbine.com
Service company for Windtec WT650
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine WT650 is a production of Windtec Anlagenerrichtungs- und Consulting GmbH, a manufacturer from Austria.
The rated power of Windtec WT650 is 600,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.
The rotor diameter of the Windtec WT650 is 50 m. The rotor area amounts to 1.963 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 27 U/min.
The Windtec WT650 is fittet with a spur/planetary gearbox. The gearbox has 3 stages. Manufacturer of the transmission is Eickhoff.
In the generator, Windtec Anlagenerrichtungs- und Consulting GmbH sets to Double fed induction. The manufacturer has used one generator for the WT650. The maximum speed of the generator is 2.000 U/min. The voltage amounts to 690 V. At the mains frequency, the WT650 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Windtec focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the WT650 of Windtec are not stored in the system.
The Windtec WT650 has been listed since 12.04.2015.
The rated power of Windtec WT650 is 600,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.
The rotor diameter of the Windtec WT650 is 50 m. The rotor area amounts to 1.963 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 27 U/min.
The Windtec WT650 is fittet with a spur/planetary gearbox. The gearbox has 3 stages. Manufacturer of the transmission is Eickhoff.
In the generator, Windtec Anlagenerrichtungs- und Consulting GmbH sets to Double fed induction. The manufacturer has used one generator for the WT650. The maximum speed of the generator is 2.000 U/min. The voltage amounts to 690 V. At the mains frequency, the WT650 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Windtec focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the WT650 of Windtec are not stored in the system.
The Windtec WT650 has been listed since 12.04.2015.
More wind turbines
Windtec WT1570
1,50 MW
Windtec WT646
600,00 kW
Windtec WT1577
1,50 MW
Windtec WT1566
1,50 MW
Micon M 1800-600
600,00 kW
Senvion 6.3M152 Onshore
6,33 MW
GET Danwin 600/41
600,00 kW
Nordtank NTK 500/37
500,00 kW
EWT DW 54-250
250,00 kW
Senvion 4.2M148
4,20 MW
Windmatic WM 17s-95
95,00 kW
Enertech E 1500
1,50 kW
Köster Adler / pumping station Kaiser Wilhelm Koog
-
HVK Herborg HVK 30
30,00 kW
Gamesa G66
1,65 MW
Kingspan Renewables KW6
6,10 kW
Eozen EOZEN 1500/78
1,50 MW
Ergowind EW 50
50,00 kW
ACSA LMW-3.000
3,00 kW
Samsung S2.5-100
2,50 MW