Enercon E-115 EP3 E3 4.200
4,20
MW
- ✘ Power data
- ✔ 1 Picture
- ✘ Models
Pictures
Datasheet
Power
Rated power:
4,200.0 kW
Flexible power ratings:
-
Cut-in wind speed:
2.5 m/s
Rated wind speed:
13.2 m/s
Cut-out wind speed:
34.0 m/s
Survival wind speed:
70.0 m/s
Wind zone (DIBt):
IV
Wind class (IEC):
Ia
Rotor
Diameter:
115.7 m
Swept area:
10,516.0 m²
Number of blades:
3
Rotor speed, max:
13.2 U/min
Tipspeed:
80 m/s
Type:
-
Material:
-
Manufacturer:
Enercon
Power density 1:
399.4 W/m²
Power density 2:
2.5 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
synchronous multipole
Number:
1
Speed, max:
13.2 U/min
Voltage:
-
Grid connection:
inverters
Grid frequency:
50/60 Hz
Manufacturer:
Enercon
Tower
Hub height:
67 / 87 / 92 / 122 / 135 / 149 m
Type:
steel tube / hydrid - site specific
Shape:
conical
Corrosion protection:
coated
Manufacturer:
Enercon
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
1x Enercon E-32 / 300
used, 31m Bulgaria
1x Enercon E-40/6.44
used Germany
1x Enercon E-66
used Italy
1x Enercon E-40/5.40
used, Year 1996, 65m Germany
€ 1
8x Enercon E-66
used, Year 2002, 95m
4x Enercon E-66/18.70
used, Year 2002, 80m
12x Enercon E-18
used, Year 1997 Germany
€ 15.000
1x Enercon E-40/6.44
used, Year 2001, 48m
1x Enercon E-66
used, Year 1998, 65m Germany
1x Enercon E-18
used, Year 1993 Poland
€ 13.500
2x Enercon E-58/10.58
used, Year 2001, 71m Germany
€ 165.000
1x Enercon E-40/5.40
used, Year 1997 Germany
€ 30.000
1x Enercon E-40/5.40
used, Year 1997 Germany
€ 30.000
1x Enercon E-66
used, Year 1998, 67m Poland
1x Enercon E-40/6.44
used, Year 1999, 65m Germany
€ 26.000
2x Enercon E-40/5.40
used, Year 1998, 63m Germany
€ 85.000
1x Enercon E-18
{wtOfferCondition.refurbished}, Year 1992, 21m Poland
€ 30.000
1x Enercon E-32 / 300
used Poland
1x Enercon E-66
used, 100m Germany
powered by wind-turbine.com
Service company for Enercon E-115 EP3 E3 4.200
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine E-115 EP3 E3 4.200 is a production of Enercon GmbH, a manufacturer from Germany. This manufacturer has been in business since 1984.
The rated power of Enercon E-115 EP3 E3 4.200 is 4,20 MW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 34 m/s.
The rotor diameter of the Enercon E-115 EP3 E3 4.200 is 115,7 m. The rotor area amounts to 10.516 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 13,2 U/min.
The Enercon E-115 EP3 E3 4.200 is fittet with a direct drive gearbox.
In the generator, Enercon GmbH sets to synchronous multipole. The manufacturer has used one generator for the E-115 EP3 E3 4.200. The maximum speed of the generator is 13,2 U/min. At the mains frequency, the E-115 EP3 E3 4.200 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube / hydrid - site specific. As corrosion protection for the tower Enercon focuses on coated. Manufacturer of the tower is Enercon.
There is one picture of the wind turbine E-115 EP3 E3 4.200. There are no models for this wind turbine. Power data for the E-115 EP3 E3 4.200 of Enercon are not stored in the system.
The Enercon E-115 EP3 E3 4.200 has been listed since 30.09.2018. The last modification of the master data was made on 06.12.2020.
The rated power of Enercon E-115 EP3 E3 4.200 is 4,20 MW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 34 m/s.
The rotor diameter of the Enercon E-115 EP3 E3 4.200 is 115,7 m. The rotor area amounts to 10.516 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 13,2 U/min.
The Enercon E-115 EP3 E3 4.200 is fittet with a direct drive gearbox.
In the generator, Enercon GmbH sets to synchronous multipole. The manufacturer has used one generator for the E-115 EP3 E3 4.200. The maximum speed of the generator is 13,2 U/min. At the mains frequency, the E-115 EP3 E3 4.200 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube / hydrid - site specific. As corrosion protection for the tower Enercon focuses on coated. Manufacturer of the tower is Enercon.
There is one picture of the wind turbine E-115 EP3 E3 4.200. There are no models for this wind turbine. Power data for the E-115 EP3 E3 4.200 of Enercon are not stored in the system.
The Enercon E-115 EP3 E3 4.200 has been listed since 30.09.2018. The last modification of the master data was made on 06.12.2020.
More wind turbines
Enercon E-40/5.40
500,00 kW
Enercon E-115 EP3 E3 2.990
2,99 MW
Enercon E-126 6.000
6,00 MW
Enercon E-115 2.500
2,50 MW
Enercon E-10
30,00 kW
Enercon E-126 EP4
4,20 MW
Enercon E-126 EP3 3.5MW
3,50 MW
Enercon E-115 3.000
3,00 MW
Enercon E-82 E2 2.000
2,00 MW
Enercon E-70 E4 2.300
2,30 MW
Enercon E-147 EP5 E2
5,00 MW
Enercon E-44
900,00 kW
Enercon E-40/6.44
600,00 kW
Enercon E-82 E4 3.000
3,00 MW
Enercon E-30 / 330
330,00 kW
Enercon E-16
55,00 kW
Enercon E-175 EP5 E2
6,00 MW
Enercon E-138 EP3
3,50 MW
Enercon E-82 E5 2.350
2,35 MW
Enercon E-160 EP5 E1
4,60 MW