Windtec WT646

The wind turbine WT646 is a production of Windtec Anlagenerrichtungs- und Consulting GmbH, a manufacturer from Austria.

The rated power of Windtec WT646 is 600,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 30,0 m/s.

The rotor diameter of the Windtec WT646 is 45,8 m. The rotor area amounts to 1.647 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 33 U/min.

The Windtec WT646 is fittet with a spur/planetary gearbox. The gearbox has 3 stages. Manufacturer of the transmission is Eickhoff.

In the generator, Windtec Anlagenerrichtungs- und Consulting GmbH sets to Double Fed Asyn. The manufacturer has used one generator for the WT646. The maximum speed of the generator is 2.100 U/min. The voltage amounts to 690 V. At the mains frequency, the WT646 is at 50 Hz.

In the construction of the tower, the manufacturer uses concrete. Manufacturer of the tower is Windtec.

There is one picture of the wind turbine WT646. There are no models for this wind turbine. Power data for the WT646 of Windtec are not stored in the system.

The Windtec WT646 has been listed since 31.01.2013. The last modification of the master data was made on 08.02.2013.