Gamesa G44

600,00 kW
  • ✘ Power data
  • ✘ Pictures
  • ✘ Models

Pictures

There are no pictures stored

Datasheet

Power

Rated power:600.0 kW
Flexible power ratings:-
Cut-in wind speed:4.0 m/s
Rated wind speed:16.0 m/s
Cut-out wind speed:20.0 m/s
Survival wind speed:52.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-

Rotor

Diameter:44.0 m
Swept area:1,521.0 m²
Number of blades:3
Rotor speed, max:28.0 U/min
Tipspeed:65 m/s
Type:-
Material:GFK / Epoxy
Manufacturer:-
Power density 1:394.5 W/m²
Power density 2:2.5 m²/kW

Gear box

Type:spur/planetary
Stages:3.0
Ratio:1:51
Manufacturer:Hansen

Generator

Type:Asynchronus
Number:1
Speed, max:1,650.0 U/min
Voltage:690.0 V
Grid connection:Thyristor
Grid frequency:50 Hz
Hersteller:-

Tower

Hub height:40.5/53/63 m
Type:Steel tube
Shape:conical
Corrosion protection:painted
Manufacturer:-

Weight

Single blade:1.5 t
Hub:-
Rotor:-
Nacelle:19.8 t
Tower, max:58.0 t
Total weight:-

Miscellaneous

Installation:-
Offshore:No
Onshore:Yes

Power curve

There are no power data deposited for this turbine.

Marketplace

3x Gamesa G58
used, Year 2015, 55m Spain
€ 750.000
6x Gamesa G80
used, Year 2005, 60m Germany
€ 290.000
2x Gamesa G87
used, Year 2005, 78m
10x Gamesa G58
used, Year 2004, 71m Germany
€ 185.000
4x Gamesa G58
new, Year 2018, 65m
€ 380.000
1x AN Bonus 600/44 MK IV
used, 42m Sweden
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
1x Enercon E-40/6.44
used, Year 2001, 48m
1x Bonus B44/600
used, Year 1998, 40m Netherlands
5x Nordtank NTK 600
used, Year 1995, 43m Poland
3x Enercon E-40/6.44
used, Year 2003, 78m Germany
€ 182.500
1x Made - Endesa AE-45
used, 41m Spain
€ 70.000
2x Jacobs 48/600
used, Year 2003, 65m Germany
2x TURBOWINDS T600-48
used, Year 2005, 65m Canada
€ 534.540
1x NEG Micon NM 48/600
used, Year 1998, 40m
2x NEG Micon NM 48/600
used, Year 2001, 45m Netherlands
€ 49.500
1x Enercon E-40/6.44
used, Year 1999, 65m Germany
€ 110.000
4x Bonus B44/600
used, Year 1999, 1m
3x Bonus B44/600
used, Year 1999, 58m Ukraine
powered by wind-turbine.com

Models

There are no models to this Windturbine.

Description

The wind turbine G44 is a production of Gamesa Corporación Tecnológica (Grupo Auxiliar MEtalurgico, SA), a manufacturer from Spain. This manufacturer has been in business since 1994. Since year 2017, Gamesa Corporación Tecnológica (Grupo Auxiliar MEtalurgico, SA) is no longer active. The manufacturer was taken over by Siemens Gamesa Renewable Energy.

The rated power of Gamesa G44 is 600,00 kW. At a wind speed of 4 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.

The rotor diameter of the Gamesa G44 is 44 m. The rotor area amounts to 1.521 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 28 U/min.

The Gamesa G44 is fittet with a spur/planetary gearbox. The gearbox has 3 stages. Manufacturer of the transmission is Hansen.

In the generator, Gamesa Corporación Tecnológica (Grupo Auxiliar MEtalurgico, SA) sets to Asynchronus. The manufacturer has used one generator for the G44. The maximum speed of the generator is 1.650 U/min. The voltage amounts to 690 V. At the mains frequency, the G44 is at 50 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Gamesa focuses on painted.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the G44 of Gamesa are not stored in the system.

The Gamesa G44 has been listed since 10.11.2013. The last modification of the master data was made on 03.07.2017.

More wind turbines

Gamesa G114-2.5MW
2,50 MW
Gamesa G132-3.465MW
3,47 MW
Gamesa G87
2,00 MW
Gamesa G128-5.0MW
5,00 MW
Gamesa G114-2.1MW
2,10 MW
Gamesa G126-2.5MW
2,50 MW
Gamesa G126-2.625MW
2,63 MW
Gamesa G90
2,00 MW
Gamesa G97
2,00 MW
Gamesa G47
660,00 kW
Gamesa G83
2,00 MW
Gamesa G80
2,00 MW
Gamesa G132-3.3MW
3,30 MW
Gamesa G42
600,00 kW
Gamesa G39
500,00 kW
Gamesa G128-4.5MW
4,50 MW
Gamesa G132-5.0MW
5,00 MW
Gamesa G106-2.5MW
2,50 MW
Gamesa G114-2.0MW
2,00 MW
Gamesa G114-2.625MW
2,63 MW