WindMaster / HMZ WM 150

150,00 kW
  • ✘ Power data
  • ✘ Pictures
  • ✘ Models


There are no pictures stored



Rated power:150.0 kW
Flexible power ratings:150.0 - 165.0 kW
Cut-in wind speed:5.0 m/s
Rated wind speed:12.5 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:50.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:22.0 m
Swept area:373.0 m²
Number of blades:3
Rotor speed, max:52.0 U/min
Tipspeed:60 m/s
Type:22WPX / 10.5m
Material:Fiberglas reinforced
Power density 1:402.1 W/m²
Power density 2:2.5 m²/kW

Gear box



Speed, max:1,500.0 U/min
Voltage:380.0 V
Grid connection:-
Grid frequency:50/60 Hz


Hub height:23 m
Type:tubular tapered welded steel
Corrosion protection:hot dip galvanized


Single blade:-
Tower, max:8.6 t
Total weight:18.5 t



Power curve

There are no power data deposited for this turbine.


1x WindMaster / HMZ WM 300/28
used, 35m
8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
5x Bonus B23/150 Gittermast
used, Year 1993, 30m Germany
2x AN Bonus 150/30
used, Year 1990, 30m Poland
4x AN Bonus 150/30
used, 30m Germany
25x Bonus B23/150 Gittermast
used, Year 1995, 25m
10x Wind World W2800/150
used, 30m France
€ 30.000
1x Wind World W2800/150
used, 35m Germany
€ 120.000
1x Wind World W2320/150
used, 30m
15x Tacke TW 150
used, Year 1986, 24m United States
3x AN Bonus 150/30
used, Year 1991, 30m Poland
€ 39.000
1x DWP D150/24
used, Year 1992, 30m Czech Republic
€ 20.000
1x Wind World W2320/150
used, Year 1988, 30m
€ 25.000
2x AN Bonus 150/30
used, 30m
€ 35.000
5x Bonus B23/150 Gittermast
used, Year 1994, 24m
2x AN Bonus 150/30
used, 30m
€ 31.000
3x ecotècnia ECO 20/150
used, Year 1993, 30m
1x Bonus B23/150 Gittermast
used, Year 1993
3x ecotècnia ECO 20/150
used, Year 1990, 30m
powered by

Service company for WindMaster / HMZ WM 150


There are no models to this Windturbine.


The wind turbine WM 150 is a production of WindMaster / HMZ, a manufacturer from Belgium. This manufacturer has been in business since 1980. Since year 1998, WindMaster / HMZ is no longer active. The manufacturer was taken over by Lagerwey.

The rated power of WindMaster / HMZ WM 150 is 150,00 kW. At a wind speed of 5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the WindMaster / HMZ WM 150 is 22 m. The rotor area amounts to 373 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 52 U/min.

The WindMaster / HMZ WM 150 is fittet with a helical gearbox. The gearbox has 3 stages.

In the generator, WindMaster / HMZ sets to induction. The manufacturer has used one generator for the WM 150. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 380 V. At the mains frequency, the WM 150 is at 50 Hz.

In the construction of the tower, the manufacturer uses tubular tapered welded steel. As corrosion protection for the tower WindMaster / HMZ focuses on hot dip galvanized.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the WM 150 of WindMaster / HMZ are not stored in the system.

The WindMaster / HMZ WM 150 has been listed since 22.03.2020. The last modification of the master data was made on 22.03.2020.

More wind turbines

WindMaster / HMZ WM 300/25
300,00 kW
WindMaster / HMZ WM 600 VS45
600,00 kW
WindMaster / HMZ WM 300/28
300,00 kW
WindMaster / HMZ WM 300/30
300,00 kW
WindMaster / HMZ WM 200
200,00 kW
WindMaster / HMZ WM 100
100,00 kW
WindMaster / HMZ WM 225
225,00 kW
WindMaster / HMZ WM 1300
1,30 MW
WindMaster / HMZ WM 750
750,00 kW
Selvbygger 7.5 kW
7,50 kW
Windey WD82-1500
1,50 MW
Swiss Electric YZ130/2.5
2,50 MW
Envision EN128-2.3
2,30 MW
Riva Calzoni M55
800,00 kW
SANY SE15536
3,60 MW
Vestas V42
600,00 kW
Vestas V15 - 55 Nacelle
55,00 kW
Enercon E-115 EP3 4.000
4,00 MW
Vestas V80 Offshore
2,00 MW
NEG Micon NM 82/1650
1,65 MW