WindMaster / HMZ WM 300/28

300,00 kW
  • ✘ Power data
  • ✔ 57 Pictures
  • ✔ 1 Model



Rated power:300.0 kW
Flexible power ratings:-
Cut-in wind speed:4.0 m/s
Rated wind speed:13.0 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:62.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:28.0 m
Swept area:615.0 m²
Number of blades:3
Rotor speed, max:43.0 U/min
Tipspeed:63 m/s
Type:NACA 63
Power density 1:487.8 W/m²
Power density 2:2.1 m²/kW

Gear box



Speed, max:1,515.0 U/min
Voltage:380.0 V
Grid connection:Thyristor
Grid frequency:50.0 Hz
Manufacturer:ABB / AEG


Hub height:33/40/50 m
Type:Steel tube
Corrosion protection:painted


Single blade:0.8 t
Nacelle:15.0 t
Tower, max:27.0 t
Total weight:-



Power curve

There are no power data deposited for this turbine.


1x Nordtank NTK 300
new, 30m Italy
€ 150.000
1x Tacke TW 300
used, Year 1994, 50m Germany
€ 150.000
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
5x Nordtank NTK 300
used, Year 2014, 30m Italy
€ 130.000
2x Bonus B31/300
used, Year 1991, 30m
2x Bonus B31/300
used, Year 1994, 30m
3x Bonus B31/300
used, Year 1992, 30m Germany
€ 40.000
4x Enercon E-32 / 300
used, Year 1993 United Kingdom
€ 20.000
1x Nordtank NTK 300
used, Year 1998, 30m
1x Bonus B31/300
used, Year 1986, 24m
1x Enercon E-32 / 300
used, 31m
16x Enercon E-30
used, Year 1996, 44m India
€ 87.308
3x Nordtank NTK 300
used, Year 1993, 35m Finland
€ 80.000
1x Enercon E-32 / 300
used Poland
1x Bonus B31/300
used, 24m
1x Enercon E-30
used, Year 1996, 48m
€ 25.000
1x Enercon E-30
used, 60m
1x Enercon E-30
used, Year 1998, 50m
1x AN Bonus 600/44 MK IV
used, 42m Sweden
powered by

Service company for WindMaster / HMZ WM 300/28


WindMaster / HMZ WM 300/28


The wind turbine WM 300/28 is a production of WindMaster / HMZ, a manufacturer from Netherlands. Since year 1998, WindMaster / HMZ is no longer active. The manufacturer was taken over by Lagerwey.

The rated power of WindMaster / HMZ WM 300/28 is 300,00 kW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the WindMaster / HMZ WM 300/28 is 28,0 m. The rotor area amounts to 615,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 43,0 U/min.

The WindMaster / HMZ WM 300/28 is fittet with a Spur gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Hansen/PIV.

In the generator, WindMaster / HMZ sets to Asynchronus. The manufacturer has used one generator for the WM 300/28. The maximum speed of the generator is 1.515,0 U/min. The voltage amounts to 380,0 V. At the mains frequency, the WM 300/28 is at 50,0 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower WindMaster / HMZ focuses on painted.

We have 57 pictures of this wind turbine. One model has been entered to the wind turbine. This is the WindMaster / HMZ WM 300/28 - Desk model. Power data for the WM 300/28 of WindMaster / HMZ are not stored in the system.

The WindMaster / HMZ WM 300/28 has been listed since 24.10.2012. The last modification of the master data was made on 03.07.2017.

More wind turbines

WindMaster / HMZ WM 100
100,00 kW
WindMaster / HMZ WM 750
750,00 kW
WindMaster / HMZ WM 300/30
300,00 kW
WindMaster / HMZ WM 1300
1,30 MW
Suzlon S.66-1250
1,25 MW
Ergowind EW 60
60,00 kW
Windey WD121-2000
2,00 MW
Suzlon S.64-950
950,00 kW
Nordex N80 Alpha
2,50 MW
Polenko WPS 11
40,00 kW
Nordtank NTK 10 Prototyp
10,00 kW
Nordex N29
250,00 kW
Hyundai HQ2000/93
2,00 MW
aerodyn aM 3.2/140
3,20 MW
NEPC SRC 29.8-200
200,00 kW
Gamesa G126-2.625MW
2,63 MW
Poulsen MK II
15,00 kW
Vergnet GEV MP C 200/32
200,00 kW
DS-wind DS-500
500,00 kW
Pfleiderer PWE 1577
1,50 MW