WindMaster / HMZ WM 200

200,00 kW
  • ✘ Power data
  • ✘ Pictures
  • ✘ Models


There are no pictures stored



Rated power:200.0 kW
Flexible power ratings:-
Cut-in wind speed:5.0 m/s
Rated wind speed:16.0 m/s
Cut-out wind speed:26.0 m/s
Survival wind speed:67.5 m/s
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:21.8 m
Swept area:373.0 m²
Number of blades:3
Rotor speed, max:54.0 U/min
Tipspeed:62 m/s
Material:Fiberglas reinforced
Power density 1:536.2 W/m²
Power density 2:1.9 m²/kW

Gear box



Speed, max:1,500.0 U/min
Voltage:380.0 V
Grid connection:-
Grid frequency:50/60 Hz


Hub height:23 m
Type:tubular tapered welded steel
Corrosion protection:hot dip galvanized


Single blade:-
Tower, max:8.6 t
Total weight:18.5 t



Power curve

There are no power data deposited for this turbine.


1x WindMaster / HMZ WM 300/28
used, 35m
1x Danwin Danwin 24/200
used, 30m
1x Micon M 450
used, Year 1989, 30m Finland
€ 29.000
2x Wincon W200/26
used, 30m
1x Micon M 570-200
used, Year 1997, 36m
€ 50.000
1x Wincon W200/24
used, Year 1990, 30m
€ 137.000
1x Micon M 570-200
used, 36m
1x Micon M 570-200
used, 36m
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
1x GE General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
powered by

Service company for WindMaster / HMZ WM 200


There are no models to this Windturbine.


The wind turbine WM 200 is a production of WindMaster / HMZ, a manufacturer from Belgium. This manufacturer has been in business since 1980. Since year 1998, WindMaster / HMZ is no longer active. The manufacturer was taken over by Lagerwey.

The rated power of WindMaster / HMZ WM 200 is 200,00 kW. At a wind speed of 5 m/s, the wind turbine starts its work. the cut-out wind speed is 26 m/s.

The rotor diameter of the WindMaster / HMZ WM 200 is 21,8 m. The rotor area amounts to 373 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 54 U/min.

The WindMaster / HMZ WM 200 is fittet with a helical gearbox. The gearbox has 3 stages.

In the generator, WindMaster / HMZ sets to induction. The manufacturer has used one generator for the WM 200. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 380 V. At the mains frequency, the WM 200 is at 50 Hz.

In the construction of the tower, the manufacturer uses tubular tapered welded steel. As corrosion protection for the tower WindMaster / HMZ focuses on hot dip galvanized.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the WM 200 of WindMaster / HMZ are not stored in the system.

The WindMaster / HMZ WM 200 has been listed since 22.03.2020.

More wind turbines

WindMaster / HMZ WM 100
100,00 kW
WindMaster / HMZ WM 1300
1,30 MW
WindMaster / HMZ WM 150
150,00 kW
WindMaster / HMZ WM 300/25
300,00 kW
WindMaster / HMZ WM 300/30
300,00 kW
WindMaster / HMZ WM 225
225,00 kW
WindMaster / HMZ WM 750
750,00 kW
WindMaster / HMZ WM 300/28
300,00 kW
WindMaster / HMZ WM 600 VS45
600,00 kW
Windey WD70-1500
1,50 MW
Global Wind Power Lt GWP47-750kW
750,00 kW
Vestas V15
55,00 kW
Senvion MM100
2,00 MW
Sinovel SL5000/155
5,00 MW
aerodyn aM 1.5/87
1,50 MW
Gödecke AeroCraft 1002H
1,00 kW
Vensys 126/3800
3,80 MW
Vestas V66-2.0
2,00 MW
EWT DW 61-500
500,00 kW
PSW EN-Drive 2000 3kW
3,00 kW