CRIEL CT100-26
100,00
kW
Small wind turbine
- ✘ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
100.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.0 m/s
Rated wind speed:
11.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
63.5 m/s
Wind zone (DIBt):
-
Wind class (IEC):
IIa
Rotor
Diameter:
25.6 m
Swept area:
515.0 m²
Number of blades:
3
Rotor speed, max:
45.0 U/min
Tipspeed:
60 m/s
Type:
-
Material:
fiberglass
Manufacturer:
-
Power density 1:
194.2 W/m²
Power density 2:
5.2 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
Synchronous multipolar with permanent magnets
Number:
1
Speed, max:
45.0 U/min
Voltage:
400.0 V
Grid connection:
IGBT
Grid frequency:
50 Hz
Manufacturer:
-
Tower
Hub height:
30/ 36/ 40 m
Type:
steel tube
Shape:
conical
Corrosion protection:
painted
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x Vestas V20
used, Year 1988, 24m
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
2x Nordex N27/150
used, Year 1998, 30m Ireland
€ 61.843
2x RRB Energy V27-225
used, 30m Ireland
€ 133.783
2x Nordex N29
used, 30m Ireland
€ 74.464
1x NEG Micon NM 44/750
used, 12m China
€ 890.900
4x Bonus B44/600
used, Year 1999, 1m Spain
1x Enercon E-32 / 300
used, 31m Bulgaria
3x NEG Micon NM 92/2750
used, Year 2004, 80m Netherlands
€ 1.200.000
1x NEG Micon NM 60/1000
used, Year 2001, 70m Poland
2x Gamesa G87
used, Year 2005, 78m Spain
1x Vestas V80 Offshore
used, Year 2014, 100m Poland
€ 24
2x Nordex N80 Alpha
used, Year 2002, 80m Germany
1x Vestas V66-1.65
used, Year 1999, 78m Germany
1x Wind World W5200/750
used, Year 1999, 65m Poland
32x Bonus B62/1300
used, 52m Aruba
2x Vestas V29
used, 30m Denmark
2x RRB Energy V27-225
used, 30m Denmark
powered by wind-turbine.com
Service company for CRIEL CT100-26
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine CT100-26 is a production of CRIEL GROUP S.r.l., a manufacturer from Italy.
The rated power of CRIEL CT100-26 is 100,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the CRIEL CT100-26 is 25,6 m. The rotor area amounts to 515 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 45 U/min.
The CRIEL CT100-26 is fittet with a direct drive gearbox.
In the generator, CRIEL GROUP S.r.l. sets to Synchronous multipolar with permanent magnets. The manufacturer has used one generator for the CT100-26. The maximum speed of the generator is 45 U/min. The voltage amounts to 400 V. At the mains frequency, the CT100-26 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower CRIEL focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the CT100-26 of CRIEL are not stored in the system.
The CRIEL CT100-26 has been listed since 19.07.2017.
The rated power of CRIEL CT100-26 is 100,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the CRIEL CT100-26 is 25,6 m. The rotor area amounts to 515 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 45 U/min.
The CRIEL CT100-26 is fittet with a direct drive gearbox.
In the generator, CRIEL GROUP S.r.l. sets to Synchronous multipolar with permanent magnets. The manufacturer has used one generator for the CT100-26. The maximum speed of the generator is 45 U/min. The voltage amounts to 400 V. At the mains frequency, the CT100-26 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower CRIEL focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the CT100-26 of CRIEL are not stored in the system.
The CRIEL CT100-26 has been listed since 19.07.2017.
More wind turbines
CRIEL CT50-26
49,99 kW
CRIEL CT50-16
49,99 kW
CRIEL CT60-16
60,00 kW
CRIEL CT60-26
59,99 kW
Nordex N27/150
150,00 kW
Windey WD131-2200
2,20 MW
REpower 5M Offshore
5,08 MW
Ventis V12 500 Prototype
500,00 kW
Solener 10.000
10,00 kW
Vensys 77/1500- Timber Tower
1,50 MW
DS-wind DS-400
400,00 kW
Vestas V174-9.5
9,50 MW
Enron 1.5 s
1,50 MW
Micon 108 US
108,00 kW
GE General Electric GE 1.5xle
1,50 MW
Victor Energy Victor 5kW
5,00 kW
C&F CF 20
20,00 kW
MingYang MY2.0/110 - MY2000/110
2,00 MW
Smedemester Mølle Ydby
22,00 kW
Norwin 24 STALL 150
150,00 kW