CRIEL CT50-16

49,99 kW
  • ✘ Power data
  • ✔ 1 Picture
  • ✘ Models

Pictures

Datasheet

Power

Rated power:50.0 kW
Cut-in wind speed:3.0 m/s
Rated wind speed:9.7 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:52.5 m/s
Wind zone (DIBt):-
Wind class (IEC):IIa

Rotor

Diameter:17.5 m
Swept area:240.5 m²
Number of blades:3
Rotor speed, max:63.0 U/min
Tipspeed:58 m/s
Type:-
Material:Fiberglass
Manufacturer:-
Power density 1:207.9 W/m²
Power density 2:4.8 m²/kW

Gear box

Type:direct drive
Stages:-
Ratio:-
Manufacturer:-

Generator

Type:Synchronous multipolar with permanent magnets
Number:1
Speed, max:63.0 U/min
Voltage:400.0 V
Grid connection:IGBT
Grid frequency:50 Hz
Hersteller:-

Tower

Hub height:25.4 m
Type:steel tube
Shape:conical
Corrosion protection:painted
Manufacturer:-

Weight

Single blade:-
Hub:-
Rotor:-
Nacelle:-
Tower, max:-
Total weight:-

Miscellaneous

Installation:-
Offshore:No
Onshore:Yes

Power curve

There are no power data deposited for this turbine.

Marketplace

2x Enercon E-40/5.40
used, 50m Germany
€ 30.000
1x Enercon E-58/10.58
used, Year 2003 Germany
1x Wind World W2700
used United States
€ 48.000
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
3x Vestas V29
used, Year 1998, 29m Germany
2x Enercon E-48
used, Year 2005, 50m Germany
1x General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N 90/2500
used, Year 2009, 80m Germany
€ 360.000
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
2x Bonus B54/1000
used, Year 1998, 70m Germany
€ 99.000
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Enercon E-32 / 300
used
€ 32.000
1x WinWinD WWD-1 D60
used, Year 2004, 60m
€ 40.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
8x Bonus B23/150 Gittermast
used, 30m Poland
powered by wind-turbine.com

Models

There are no models to this Windturbine.

Description

The wind turbine CT50-16 is a production of CRIEL GROUP S.r.l., a manufacturer from Italy.

The rated power of CRIEL CT50-16 is 49,99 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the CRIEL CT50-16 is 17,5 m. The rotor area amounts to 240,5 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 63 U/min.

The CRIEL CT50-16 is fittet with a direct drive gearbox.

In the generator, CRIEL GROUP S.r.l. sets to Synchronous multipolar with permanent magnets. The manufacturer has used one generator for the CT50-16. The maximum speed of the generator is 63 U/min. The voltage amounts to 400 V. At the mains frequency, the CT50-16 is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower CRIEL focuses on painted.

There is one picture of the wind turbine CT50-16. There are no models for this wind turbine. Power data for the CT50-16 of CRIEL are not stored in the system.

The CRIEL CT50-16 has been listed since 19.07.2017.

More wind turbines

CRIEL CT100-26
100,00 kW
CRIEL CT60-26
59,99 kW
CRIEL CT50-26
49,99 kW
CRIEL CT60-16
60,00 kW
Zephyr WTS 28.250
250,00 kW
NEG Micon NM 110/4200
4,20 MW
Hyosung HS139
5,00 MW
Südwind S-46
750,00 kW
M.Torres TWT 2.5-109
2,50 MW
Danish Wind Turbines 22 kW
22,00 kW
Newinco 34 PI 500
500,00 kW
Micon M 1500-500
500,00 kW
WESPA 750/47
750,00 kW
Enertech Thunderbird 4000
4,00 kW
Palmtree Power 300
300,00 kW
REpower 6.2M126 Onshore
6,15 MW
Enertech E 44A
40,00 kW
Aerolite A-7
12,50 kW
NEG Micon NM 44/750
750,00 kW
XEMC DARWIND XD115 5.0
5,00 MW