Ventis V12 500 Prototype
500,00
kW
- ✘ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
500.0 kW
Flexible power ratings:
-
Cut-in wind speed:
4.0 m/s
Rated wind speed:
13.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
70.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
40.0 m
Swept area:
1,257.0 m²
Number of blades:
2
Rotor speed, max:
34.0 U/min
Tipspeed:
71 m/s
Type:
A&R 40
Material:
GFK
Manufacturer:
Abeking & Rasmussen
Power density 1:
397.8 W/m²
Power density 2:
2.5 m²/kW
Gear box
Type:
Spur
Stages:
3.0
Ratio:
1:46
Manufacturer:
PIV
Generator
Type:
Asynchronus
Number:
1.0
Speed, max:
1,537.0 U/min
Voltage:
690.0 V
Grid connection:
Thyristor
Grid frequency:
50.0 Hz
Manufacturer:
Loher
Tower
Hub height:
43.5/55.0 m
Type:
Steel tube
Shape:
conical
Corrosion protection:
painted
Manufacturer:
-
Weight
Single blade:
2.1 t
Hub:
-
Rotor:
-
Nacelle:
25.0 t
Tower, max:
53.0 t
Total weight:
89.0 t
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x Tacke TW 500
used, Year 1996, 53m Czech Republic
€ 50.000
1x Micon M 1500-500
used, 46m Germany
1x Enercon E-40/5.40
used, Year 1996, 65m Germany
€ 1
2x Tacke TW 500
used, Year 1993, 40m Germany
€ 50.000
1x Enercon E-40/5.40
used, Year 1997 Germany
€ 30.000
1x Enercon E-40/5.40
used, Year 1997 Germany
€ 30.000
2x Enercon E-40/5.40
used, Year 1998, 63m Germany
€ 85.000
1x Enercon E-40/5.40
used, 100m Spain
1x Nordtank NTK 500/41
used, Year 1999, 50m Poland
€ 49.000
10x NedWind NW 35/500
used, Year 1990, 30m Netherlands
4x Wind World W3700
used, Year 1995, 40m Sweden
4x Enercon E-40/5.40
used, Year 2001, 63m Germany
5x Micon M 1500-500
used, Year 1996, 43m Germany
1x Vestas V20
used, Year 1988, 24m
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
2x Nordex N27/150
used, Year 1998, 30m Ireland
€ 61.843
2x RRB Energy V27-225
used, 30m Ireland
€ 133.783
2x Nordex N29
used, 30m Ireland
€ 74.464
powered by wind-turbine.com
Service company for Ventis V12 500 Prototype
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine V12 500 Prototype is a production of Ventis Energietechnik GmbH , a manufacturer from Germany. Ventis Energietechnik GmbH is no longer active.
The rated power of Ventis V12 500 Prototype is 500,00 kW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Ventis V12 500 Prototype is 40,0 m. The rotor area amounts to 1.257,0 m². The wind turbine is equipped with 2 rotor blades. The maximum rotor speed is 34,0 U/min.
The Ventis V12 500 Prototype is fittet with a Spur gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is PIV.
In the generator, Ventis Energietechnik GmbH sets to Asynchronus. The manufacturer has used one generator for the V12 500 Prototype. The maximum speed of the generator is 1.537,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the V12 500 Prototype is at 50,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Ventis focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the V12 500 Prototype of Ventis are not stored in the system.
The Ventis V12 500 Prototype has been listed since 31.01.2013. The last modification of the master data was made on 21.02.2015.
The rated power of Ventis V12 500 Prototype is 500,00 kW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Ventis V12 500 Prototype is 40,0 m. The rotor area amounts to 1.257,0 m². The wind turbine is equipped with 2 rotor blades. The maximum rotor speed is 34,0 U/min.
The Ventis V12 500 Prototype is fittet with a Spur gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is PIV.
In the generator, Ventis Energietechnik GmbH sets to Asynchronus. The manufacturer has used one generator for the V12 500 Prototype. The maximum speed of the generator is 1.537,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the V12 500 Prototype is at 50,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Ventis focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the V12 500 Prototype of Ventis are not stored in the system.
The Ventis V12 500 Prototype has been listed since 31.01.2013. The last modification of the master data was made on 21.02.2015.
More wind turbines
Ventis 04-05
5,00 kW
Ventis V20 100
100,00 kW
Eolica 2kW
2,00 kW
WEG AGW 172/7.X
7,00 MW
Meize New Energy MZ29
850,00 kW
Vestas V100-2.0
2,00 MW
Nordtank NTK 450
450,00 kW
Kongsted Kongsted Møllen - wood blades
22,00 kW
SANY SI-225100
10,00 MW
K.M. Vindmøller T202 Swinger
11,00 kW
Unison U54
750,00 kW
Scanwind SW 3000 GL
3,00 MW
Südwind S-46
600,00 kW
Windmatic WM 19-105
105,00 kW
Scandinavian Wind Odder Mølle 18 SP
18,50 kW
Carter CWT 500
500,00 kW
WinWinD WWD-3 D109
3,00 MW
DANREGN Bonus 55
55,00 kW
REpower 48/600
600,00 kW
Shanghai Electric W4650-182 / WH4.65N-182
4,65 MW