Solener 10.000

10,00 kW Small wind turbine
  • ✘ Power data
  • ✘ Pictures
  • ✘ Models

Pictures

There are no pictures stored

Datasheet

Power

Rated power:
10.0 kW
Flexible power ratings:
-
Cut-in wind speed:
2.5 m/s
Rated wind speed:
12.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
-
Wind zone (DIBt):
-
Wind class (IEC):
-

Rotor

Diameter:
5.1 m
Swept area:
20.0 m²
Number of blades:
3
Rotor speed, max:
-
Tipspeed:
-
Type:
2.45m blades
Material:
carbon fiber. glassfiber & epoxy
Manufacturer:
-
Power density 1:
500.0 W/m²
Power density 2:
2.0 m²/kW

Gear box

Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-

Generator

Type:
permanent magnet
Number:
1
Speed, max:
-
Voltage:
400.0 V
Grid connection:
star
Grid frequency:
50 Hz
Manufacturer:
-

Tower

Hub height:
9 / 12 / 15 m
Type:
lattice shape with guys / tripod shape / tubular shape with guys
Shape:
varied
Corrosion protection:
hot-galvanized
Manufacturer:
-

Weight

Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
0.2 t
Tower, max:
-
Total weight:
-

Miscellaneous

Installation:
-
Offshore:
Yes
Onshore:
Yes

Power curve

There are no power data deposited for this turbine.

Marketplace

powered by wind-turbine.com

Service company for Solener 10.000

Dismantling of wind power plants

Companies for deconstruction

Further operation

Find transport for wind energy

Crane & Tower Crane

Companies for further operation

Models

There are no models to this Windturbine.

Description

The wind turbine 10.000 is a production of Solener, a manufacturer from Spain. This manufacturer has been in business since 1976.

The rated power of Solener 10.000 is 10,00 kW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Solener 10.000 is 5,05 m. The rotor area amounts to 20 m². The wind turbine is equipped with 3 rotor blades.

The Solener 10.000 is fittet with a direct drive gearbox.

In the generator, Solener sets to permanent magnet. The manufacturer has used one generator for the 10.000. The voltage amounts to 400 V. At the mains frequency, the 10.000 is at 50 Hz.

In the construction of the tower, the manufacturer uses lattice shape with guys / tripod shape / tubular shape with guys. As corrosion protection for the tower Solener focuses on hot-galvanized.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the 10.000 of Solener are not stored in the system.

The Solener 10.000 has been listed since 07.04.2022.

More wind turbines

Solener 1.000
1,00 kW
Solener 5.000
5,00 kW
Solener 3.000
3,00 kW
Solener 2.000
2,00 kW
Solener 15.000
15,00 kW
Elwinger Armschwinger
5,00 kW
Köster Adler / pumping station Kaiser Wilhelm Koog
-
AMSC wt3000df TC IIIA
3,00 MW
Enercon E-66/15.70
1,50 MW
Windkraft-Zentrale elektrOmat 10kW / 3 blade version
10,00 kW
Gamesa G128-4.5MW
4,50 MW
Nordic Folkecenter Hanstholm HM-37 525
525,00 kW
Endurance X-29
225,00 kW
Reymo 22/95
95,00 kW
Vestas V80-2.0
2,00 MW
Aeritalia AIT 03
17,00 kW
NEG Micon NM 82/1650
1,65 MW
MingYang MY1.5/89 - MY1500/89
1,50 MW
Vestas V80-1.8
1,80 MW
Micon M 570-200
200,00 kW