Electria Wind Garbí 150/28

150,00 kW
  • ✘ Power data
  • ✘ Pictures
  • ✘ Models


There are no pictures stored



Rated power:150.0 kW
Flexible power ratings:-
Cut-in wind speed:2.5 m/s
Rated wind speed:10.4 m/s
Cut-out wind speed:20.0 m/s
Survival wind speed:-
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:28.0 m
Swept area:616.0 m²
Number of blades:3
Rotor speed, max:41.0 U/min
Tipspeed:60 m/s
Type:WN 135 13.5
Power density 1:243.5 W/m²
Power density 2:4.1 m²/kW

Gear box



Type:Synchronous permanent
Speed, max:350.0 U/min
Voltage:400.0 V
Grid connection:IGBT
Grid frequency:50 Hz


Hub height:35 m
Type:Steel tube
Corrosion protection:painted


Single blade:-
Nacelle:11.5 t
Tower, max:20.8 t
Total weight:32.3 t



Power curve

There are no power data deposited for this turbine.


8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
5x Bonus B23/150 Gittermast
used, Year 1993, 30m Germany
2x AN Bonus 150/30
used, Year 1990, 30m Poland
4x AN Bonus 150/30
used, 30m Germany
25x Bonus B23/150 Gittermast
used, Year 1995, 25m
10x Wind World W2800/150
used, 30m France
€ 30.000
1x Wind World W2800/150
used, 35m Germany
€ 120.000
1x Wind World W2320/150
used, 30m
15x Tacke TW 150
used, Year 1986, 24m United States
3x AN Bonus 150/30
used, Year 1991, 30m Poland
€ 39.000
1x DWP D150/24
used, Year 1992, 30m Czech Republic
€ 20.000
1x Wind World W2320/150
used, Year 1988, 30m
€ 25.000
2x AN Bonus 150/30
used, 30m
€ 35.000
5x Bonus B23/150 Gittermast
used, Year 1994, 24m
2x AN Bonus 150/30
used, 30m
€ 31.000
3x ecotècnia ECO 20/150
used, Year 1993, 30m
1x Bonus B23/150 Gittermast
used, Year 1993
3x ecotècnia ECO 20/150
used, Year 1990, 30m
3x AN Bonus 150/30
used, Year 1995, 40m
powered by wind-turbine.com

Service company for Electria Wind Garbí 150/28


There are no models to this Windturbine.


The wind turbine Garbí 150/28 is a production of Electria Wind, a manufacturer from Spain.

The rated power of Electria Wind Garbí 150/28 is 150,00 kW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.

The rotor diameter of the Electria Wind Garbí 150/28 is 28 m. The rotor area amounts to 616 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 41 U/min.

The Electria Wind Garbí 150/28 is fittet with a parallel gearbox. The gearbox has 2 stages.

In the generator, Electria Wind sets to Synchronous permanent. The manufacturer has used one generator for the Garbí 150/28. The maximum speed of the generator is 350 U/min. The voltage amounts to 400 V. At the mains frequency, the Garbí 150/28 is at 50 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Electria Wind focuses on painted.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the Garbí 150/28 of Electria Wind are not stored in the system.

The Electria Wind Garbí 150/28 has been listed since 20.11.2013. The last modification of the master data was made on 20.11.2013.

More wind turbines

Electria Wind Garbí 100/28
100,00 kW
Electria Wind Garbí 200/28
200,00 kW
S&G Engineering SG750.66
750,00 kW
Swiss Electric YZ93/2.0
2,00 MW
Vestas V80 Offshore
2,00 MW
Soyut Soyut Wind 50
50,00 kW
Enercon E-126 EP4
4,20 MW
Acciona AW-82/1500
1,50 MW
SANY SE14634
3,40 MW
Sewind Shanghai El. W1250-62
1,25 MW
C&F CF 60
59,90 kW
Gamesa G128-4.5MW
4,50 MW
TYHI - Taiyuan TZ2500/133
2,50 MW
Südwind N 1237
37,00 kW
Newinco 25 PI 250 small tower
250,00 kW
Sinovel SL3000/90
3,00 MW
Lagerwey L147 LP4
4,30 MW
Enercon E-141 EP4
4,20 MW
Swiss Electric YZ139/6.0
6,00 MW
NEG Micon NM 92/2750
2,75 MW