Electria Wind Garbí 200/28

The wind turbine Garbí 200/28 is a production of Electria Wind, a manufacturer from Spain.

The rated power of Electria Wind Garbí 200/28 is 200,00 kW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.

The rotor diameter of the Electria Wind Garbí 200/28 is 28 m. The rotor area amounts to 616 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 47 U/min.

The Electria Wind Garbí 200/28 is fittet with a parallel gearbox. The gearbox has 2 stages.

In the generator, Electria Wind sets to Synchronous permanent. The manufacturer has used one generator for the Garbí 200/28. The maximum speed of the generator is 470 U/min. The voltage amounts to 400 V. At the mains frequency, the Garbí 200/28 is at 50 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Electria Wind focuses on painted.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the Garbí 200/28 of Electria Wind are not stored in the system.

The Electria Wind Garbí 200/28 has been listed since 20.11.2013.