Nordex N60
1,30
MW
- ✔ Power data
- ✔ 72 Pictures
- ✔ 1 Model
Pictures
Datasheet
Power
Rated power:
1,300.0 kW
Flexible power ratings:
-
Cut-in wind speed:
2.5 m/s
Rated wind speed:
15.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
60.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
60.0 m
Swept area:
2,828.0 m²
Number of blades:
3
Rotor speed, max:
19.2 U/min
Tipspeed:
60 m/s
Type:
LM 29
Material:
GFK
Manufacturer:
LM Glasfieber
Power density 1:
459.7 W/m²
Power density 2:
2.2 m²/kW
Buy blades for Nordex N60
-
Blades LM 29 Nordex N60
- Show more offers
powered by sparesinmotion.com
Gear box
Type:
spur/planetary
Stages:
3.0
Ratio:
1:79
Manufacturer:
Flender
Buy gearbox for Nordex N60
-
Flender PEAL4390
-
Gearbox Winergy PEAS 4375.1 I:78.628
-
Gearbox Winergy PEAS 4375.6 I:78.278
-
Gearbox Winergy PEAS 4375.0 I:78.628
- Show more offers
powered by sparesinmotion.com
Generator
Type:
Asynchronus
Number:
1.0
Speed, max:
1,515.0 U/min
Voltage:
690.0 V
Grid connection:
Thyristor
Grid frequency:
50.0 Hz
Manufacturer:
Elin/Loher
Buy generator for Nordex N60
-
Pitch Motor Tacho Generator 30V. Original part from the manufacturer of the Pitch System
-
60 Hz Generator 1300 kW Elin for N60 wind turbine
-
50 Hz / 1300 kW Generator Elin for a Nordex N60
- Show more offers
powered by sparesinmotion.com
Tower
Hub height:
60/65/69/85 m
Type:
Steel tube / lattice
Shape:
conical
Corrosion protection:
coated
Manufacturer:
Welcon/Omnical/Seeba
Weight
Single blade:
-
Hub:
-
Rotor:
21.5 t
Nacelle:
51.4 t
Tower, max:
154.0 t
Total weight:
227.0 t
Miscellaneous
Installation:
2001
Offshore:
No
Onshore:
Yes
Power curve
Marketplace
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
1x Nordex N43
used, Year 2000, 60m France
€ 65.000
1x Nordex N54
used, Year 1997, 60m Germany
€ 175.000
8x Nordex N80 Alpha
used, Year 2002, 80m France
2x Nordex N27/150
used, Year 1999 United States
€ 33.000
powered by wind-turbine.com
Spare parts for Nordex N60
Main Shaft - Nordex N60 , N62 1.3 Mw
LM 29.0 Glasfiber Blade Tip for Nordex N60 1300kW
Pitch Motor Tacho Generator 15V. Original Part from the manufacturer of the Pitch System.
22 BUTTONS SINGLE SINTERED BRAKE PAD FOR SVENDBORG CALIPERS WITH GROOVE
22 BUTTONS SINGLE SINTERED BRAKE PAD FOR SVENDBORG CALIPERS
powered by sparesinmotion.com
Service company for Nordex N60
Dismantling of wind power plants
Companies for deconstructionFurther operation
Find transport for wind energyCrane & Tower Crane
Companies for further operationInsurance
Find an insurer for your plantModels
Nordex N60
Desk
Description
The wind turbine N60 is a production of Nordex SE, a manufacturer from Germany. This manufacturer has been in business since 1985.
The rated power of Nordex N60 is 1,30 MW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Nordex N60 is 60,0 m. The rotor area amounts to 2.828,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19,2 U/min.
The Nordex N60 is fittet with a spur/planetary gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Flender.
In the generator, Nordex SE sets to Asynchronus. The manufacturer has used one generator for the N60. The maximum speed of the generator is 1.515,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the N60 is at 50,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube / lattice. As corrosion protection for the tower Nordex focuses on coated. Manufacturer of the tower is Welcon/Omnical/Seeba.
We have 72 pictures of this wind turbine. One model has been entered to the wind turbine. This is the Nordex N60 - Desk model. We have power data on the N60 from the Nordex in the system. You can see the powercurve in the diagram above.
The Nordex N60 has been listed since 09.10.2011. The last modification of the master data was made on 10.03.2019.
The rated power of Nordex N60 is 1,30 MW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Nordex N60 is 60,0 m. The rotor area amounts to 2.828,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19,2 U/min.
The Nordex N60 is fittet with a spur/planetary gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Flender.
In the generator, Nordex SE sets to Asynchronus. The manufacturer has used one generator for the N60. The maximum speed of the generator is 1.515,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the N60 is at 50,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube / lattice. As corrosion protection for the tower Nordex focuses on coated. Manufacturer of the tower is Welcon/Omnical/Seeba.
We have 72 pictures of this wind turbine. One model has been entered to the wind turbine. This is the Nordex N60 - Desk model. We have power data on the N60 from the Nordex in the system. You can see the powercurve in the diagram above.
The Nordex N60 has been listed since 09.10.2011. The last modification of the master data was made on 10.03.2019.
More wind turbines
Nordex N50
800,00 kW
Nordex N163/5.X
5,00 MW
Nordex N131/3900 Delta
3,90 MW
Nordex N62
1,30 MW
Nordex N52
800,00 kW
Nordex N43
600,00 kW
Nordex N155/4.5
4,50 MW
Nordex N90/2500
2,50 MW
Nordex N90 Beta
2,30 MW
Nordex N50P
800,00 kW
Nordex N117/3600 Delta
3,60 MW
Nordex N77
1,50 MW
Nordex N27/250
250,00 kW
Nordex N43 Lattice
600,00 kW
Nordex N80 Alpha
2,50 MW
Nordex N26
225,00 kW
Nordex N54 MKII
1,00 MW
Nordex N29
250,00 kW
Nordex N117 Gamma
2,40 MW
Nordex N70
1,50 MW