Enercon E-115 EP3 E4
4,26
MW
- ✘ Power data
- ✔ 8 Pictures
- ✘ Models
Pictures
Datasheet
Power
Rated power:
4,260.0 kW
Flexible power ratings:
-
Cut-in wind speed:
2.5 m/s
Rated wind speed:
13.0 m/s
Cut-out wind speed:
34.0 m/s
Survival wind speed:
59.5 m/s
Wind zone (DIBt):
IV
Wind class (IEC):
Ia, S
Rotor
Diameter:
115.7 m
Swept area:
10,516.0 m²
Number of blades:
3
Rotor speed, max:
13.2 U/min
Tipspeed:
80 m/s
Type:
E-115 EP3-RB-03 / 56.22m blade
Material:
E-glass fibre reinforced epoxy
Manufacturer:
ENEOP 3 - Desenvolvimento S.A.
Power density 1:
405.1 W/m²
Power density 2:
2.5 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
permanent magnet synchronous
Number:
1
Speed, max:
16.5 U/min
Voltage:
790.0 V
Grid connection:
4-Q full power converter
Grid frequency:
50/60 Hz
Manufacturer:
Windgeneratorenfertigung Magdeburg / ATES /GPO
Tower
Hub height:
77 / 92 m
Type:
steel tube
Shape:
conical
Corrosion protection:
coated
Manufacturer:
Wegener / SAM
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x Enercon E-40/5.40
used, Year 1996, 65m Germany
€ 1
1x Enercon E-66
used, 85m Lithuania
5x Enercon E-66
used, Year 2002 Lithuania
1x Enercon E-30 / 330
used India
1x Enercon E-40/6.44
used, 64m
2x Enercon E-66
used, 85m Germany
1x Enercon E-66
used Germany
7x Enercon E-40/6.44
used, Year 2002, 78m
1x Enercon E-40/6.44
used, 50m Germany
1x Enercon E-66
used, 98m Germany
3x Enercon E-66/18.70
used, 80m Romania
1x Enercon E-40/5.40
used, 100m Spain
1x Enercon E-58/10.58
used, 56m Poland
1x Enercon E-18
{wtOfferCondition.refurbished}, Year 2001, 36m Italy
€ 19.000
1x Enercon E-40/6.44
used, Year 2003, 77m Lithuania
€ 110.000
1x Enercon E-58/10.58
used, 56m Poland
1x Enercon E-18
used, 36m Italy
10x Enercon E-66
used, Year 1999, 65m Germany
6x Enercon E-66
used United States
3x Enercon E-66/15.70
used, Year 2008 Germany
powered by wind-turbine.com
Service company for Enercon E-115 EP3 E4
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingLifetime Extension
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine E-115 EP3 E4 is a production of Enercon GmbH, a manufacturer from Germany. This manufacturer has been in business since 1984.
The rated power of Enercon E-115 EP3 E4 is 4,26 MW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 34 m/s.
The rotor diameter of the Enercon E-115 EP3 E4 is 115,7 m. The rotor area amounts to 10.516 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 13,2 U/min.
The Enercon E-115 EP3 E4 is fittet with a direct drive gearbox.
In the generator, Enercon GmbH sets to permanent magnet synchronous. The manufacturer has used one generator for the E-115 EP3 E4. The maximum speed of the generator is 16,5 U/min. The voltage amounts to 790 V. At the mains frequency, the E-115 EP3 E4 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Enercon focuses on coated. Manufacturer of the tower is Wegener / SAM.
We have 8 pictures of this wind turbine. There are no models for this wind turbine. Power data for the E-115 EP3 E4 of Enercon are not stored in the system.
The Enercon E-115 EP3 E4 has been listed since 03.10.2021. The last modification of the master data was made on 15.04.2024.
The rated power of Enercon E-115 EP3 E4 is 4,26 MW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 34 m/s.
The rotor diameter of the Enercon E-115 EP3 E4 is 115,7 m. The rotor area amounts to 10.516 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 13,2 U/min.
The Enercon E-115 EP3 E4 is fittet with a direct drive gearbox.
In the generator, Enercon GmbH sets to permanent magnet synchronous. The manufacturer has used one generator for the E-115 EP3 E4. The maximum speed of the generator is 16,5 U/min. The voltage amounts to 790 V. At the mains frequency, the E-115 EP3 E4 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Enercon focuses on coated. Manufacturer of the tower is Wegener / SAM.
We have 8 pictures of this wind turbine. There are no models for this wind turbine. Power data for the E-115 EP3 E4 of Enercon are not stored in the system.
The Enercon E-115 EP3 E4 has been listed since 03.10.2021. The last modification of the master data was made on 15.04.2024.
More wind turbines
Enercon E-30
280,00 kW
Enercon E-32 / 300
300,00 kW
Enercon E-70 E4 2.300
2,30 MW
Enercon E-101 E2 3.500
3,50 MW
Enercon E-40/5.40
500,00 kW
Enercon E-66/18.66
1,80 MW
Enercon E-126 EP4
4,20 MW
Enercon E-103 EP2
2,35 MW
Enercon E-141 EP4
4,20 MW
Enercon E-30 / 200
200,00 kW
Enercon E-66/15.66
1,50 MW
Enercon E-18
80,00 kW
Enercon E-66
1,50 MW
Enercon E-82 E4 3.000
3,00 MW
Enercon E-175 EP5 E2 6.0MW
6,00 MW
Enercon E-15
55,00 kW
Enercon E-138 EP3 E3
4,26 MW
Enercon E-115 EP3 E3 4.200
4,20 MW
Enercon E-115 EP3 E3 2.990
2,99 MW
Enercon E-175 EP5 E2 7.0MW
7,00 MW