Enercon E-160 EP5 E3
5,56
MW
- ✘ Power data
- ✔ 35 Pictures
- ✔ 3 Models
Pictures
Datasheet
Power
Rated power:
5,560.0 kW
Flexible power ratings:
-
Cut-in wind speed:
2.5 m/s
Rated wind speed:
12.0 m/s
Cut-out wind speed:
28.0 m/s
Survival wind speed:
52.5 m/s
Wind zone (DIBt):
-
Wind class (IEC):
IIIa, S
Rotor
Diameter:
160.0 m
Swept area:
20,106.0 m²
Number of blades:
3
Rotor speed, max:
11.5 U/min
Tipspeed:
97 m/s
Type:
LM 78.3P
Material:
Glass fiber reinforced polyester
Manufacturer:
LM Wind Power
Power density 1:
276.5 W/m²
Power density 2:
3.6 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
multi-pole synchronous generator (PMG)
Number:
1
Speed, max:
11.5 U/min
Voltage:
755.2 V
Grid connection:
IGBT full power
Grid frequency:
50/60 Hz
Manufacturer:
GPO / Lagerwey
Tower
Hub height:
98 / 114 / 120 / 166 / site specific m
Type:
steel tube / hybrid HST
Shape:
conical
Corrosion protection:
coated
Manufacturer:
ATES / Cimtas
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
80.0 t
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
2021
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
1x Enercon E-32 / 300
used, 31m Bulgaria
1x Enercon E-40/6.44
used Germany
1x Enercon E-66
used Italy
1x Enercon E-40/5.40
used, Year 1996, 65m Germany
€ 1
8x Enercon E-66
used, Year 2002, 95m
4x Enercon E-66/18.70
used, Year 2002, 80m
12x Enercon E-18
used, Year 1997 Germany
€ 15.000
1x Enercon E-40/6.44
used, Year 2001, 48m
1x Enercon E-66
used, Year 1998, 65m Germany
2x Enercon E-58/10.58
used, Year 2001, 71m Germany
€ 165.000
1x Enercon E-40/5.40
used, Year 1997 Germany
€ 30.000
1x Enercon E-40/5.40
used, Year 1997 Germany
€ 30.000
1x Enercon E-66
used, Year 1998, 67m Poland
1x Enercon E-40/6.44
used, Year 1999, 65m Germany
€ 26.000
2x Enercon E-40/5.40
used, Year 1998, 63m Germany
€ 85.000
1x Enercon E-18
{wtOfferCondition.refurbished}, Year 1992, 21m Poland
€ 30.000
1x Enercon E-32 / 300
used Poland
1x Enercon E-66
used, 100m Germany
1x Enercon E-53
used, 75m Spain
powered by wind-turbine.com
Service company for Enercon E-160 EP5 E3
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingLifetime Extension
Companies for further operationInsurance
Find an insurer for your plantModels
Enercon E-160 EP5 E3
Fair
Enercon E-160 EP5 E3
Desk
Enercon E-160 EP5 E3
Desk
Description
The wind turbine E-160 EP5 E3 is a production of Enercon GmbH, a manufacturer from Germany. This manufacturer has been in business since 1984.
The rated power of Enercon E-160 EP5 E3 is 5,56 MW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 28 m/s.
The rotor diameter of the Enercon E-160 EP5 E3 is 160 m. The rotor area amounts to 20.106 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 11,52 U/min.
The Enercon E-160 EP5 E3 is fittet with a direct drive gearbox.
In the generator, Enercon GmbH sets to multi-pole synchronous generator (PMG). The manufacturer has used one generator for the E-160 EP5 E3. The maximum speed of the generator is 11,52 U/min. The voltage amounts to 755,2 V. At the mains frequency, the E-160 EP5 E3 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube / hybrid HST. As corrosion protection for the tower Enercon focuses on coated. Manufacturer of the tower is ATES / Cimtas.
We have 35 pictures of this wind turbine. There are no models for this wind turbine. Power data for the E-160 EP5 E3 of Enercon are not stored in the system.
The Enercon E-160 EP5 E3 has been listed since 06.12.2020. The last modification of the master data was made on 21.01.2024.
The rated power of Enercon E-160 EP5 E3 is 5,56 MW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 28 m/s.
The rotor diameter of the Enercon E-160 EP5 E3 is 160 m. The rotor area amounts to 20.106 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 11,52 U/min.
The Enercon E-160 EP5 E3 is fittet with a direct drive gearbox.
In the generator, Enercon GmbH sets to multi-pole synchronous generator (PMG). The manufacturer has used one generator for the E-160 EP5 E3. The maximum speed of the generator is 11,52 U/min. The voltage amounts to 755,2 V. At the mains frequency, the E-160 EP5 E3 is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube / hybrid HST. As corrosion protection for the tower Enercon focuses on coated. Manufacturer of the tower is ATES / Cimtas.
We have 35 pictures of this wind turbine. There are no models for this wind turbine. Power data for the E-160 EP5 E3 of Enercon are not stored in the system.
The Enercon E-160 EP5 E3 has been listed since 06.12.2020. The last modification of the master data was made on 21.01.2024.
More wind turbines
Enercon E-141 EP4
4,20 MW
Enercon E-66/15.70
1,50 MW
Enercon E-138 EP3 E2
4,20 MW
Enercon E-115 EP3 E3 4.200
4,20 MW
Enercon E-126 6.0 EP8
6,00 MW
Enercon E-126 EP4
4,20 MW
Enercon E-112/45.114
4,50 MW
Enercon E-36
400,00 kW
Enercon E-18 Tripod
80,00 kW
Enercon E-53
800,00 kW
Enercon E-82 E5 2.350
2,35 MW
Enercon E-66/20.70
2,00 MW
Enercon E-115 3.000
3,00 MW
Enercon E-12/30
30,00 kW
Enercon E-17
80,00 kW
Enercon E-30
300,00 kW
Enercon E-147 EP5 E2
5,00 MW
Enercon E-136 EP5
4,65 MW
Enercon E-70 E4 2.300
2,30 MW
Enercon E-115 EP3 E3 2.990
2,99 MW