Enercon E-126 EP3 3.5MW
3,50
MW
- ✘ Power data
- ✔ 52 Pictures
- ✔ 2 Models
Pictures
Datasheet
Power
Rated power:
3,500.0 kW
Flexible power ratings:
3,000.0 - 4,000.0 kW
Cut-in wind speed:
2.0 m/s
Rated wind speed:
12.1 m/s
Cut-out wind speed:
30.0 m/s
Survival wind speed:
59.5 m/s
Wind zone (DIBt):
-
Wind class (IEC):
IIa, S
Rotor
Diameter:
127.0 m
Swept area:
12,667.0 m²
Number of blades:
3
Rotor speed, max:
19.0 U/min
Tipspeed:
126 m/s
Type:
E-126 EP3-RB-05 / 61.8m blade
Material:
E-glass fibre reinforced epoxy
Manufacturer:
TPI
Power density 1:
276.3 W/m²
Power density 2:
3.6 m²/kW
Gear box
Type:
direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
synchronous. high-pole
Number:
1
Speed, max:
19.0 U/min
Voltage:
530.0 V
Grid connection:
4-Q full power converter
Grid frequency:
50/60 Hz
Manufacturer:
Windgeneratorenfertigung Magdeburg
Tower
Hub height:
86 / 116 / 135 m
Type:
steel tube / hydrid
Shape:
conical
Corrosion protection:
coated
Manufacturer:
ATES / Cimtas / SAM
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
2018
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
1x Enercon E-32 / 300
used, 31m Bulgaria
1x Enercon E-40/6.44
used Germany
1x Enercon E-66
used Italy
1x Enercon E-40/5.40
used, Year 1996, 65m Germany
€ 1
8x Enercon E-66
used, Year 2002, 95m
4x Enercon E-66/18.70
used, Year 2002, 80m
12x Enercon E-18
used, Year 1997 Germany
€ 15.000
1x Enercon E-40/6.44
used, Year 2001, 48m
1x Enercon E-66
used, Year 1998, 65m Germany
1x Enercon E-18
used, Year 1993 Poland
€ 13.500
2x Enercon E-58/10.58
used, Year 2001, 71m Germany
€ 165.000
1x Enercon E-40/5.40
used, Year 1997 Germany
€ 30.000
1x Enercon E-40/5.40
used, Year 1997 Germany
€ 30.000
1x Enercon E-66
used, Year 1998, 67m Poland
1x Enercon E-40/6.44
used, Year 1999, 65m Germany
€ 26.000
2x Enercon E-40/5.40
used, Year 1998, 63m Germany
€ 85.000
1x Enercon E-18
{wtOfferCondition.refurbished}, Year 1992, 21m Poland
€ 30.000
1x Enercon E-32 / 300
used Poland
1x Enercon E-66
used, 100m Germany
powered by wind-turbine.com
Service company for Enercon E-126 EP3 3.5MW
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
Enercon E-126 EP3 3.5MW
Fair
Enercon E-126 EP3 3.5MW
Fair
Description
The wind turbine E-126 EP3 3.5MW is a production of Enercon GmbH, a manufacturer from Germany. This manufacturer has been in business since 1984.
The rated power of Enercon E-126 EP3 3.5MW is 3,50 MW. At a wind speed of 2 m/s, the wind turbine starts its work. the cut-out wind speed is 30 m/s.
The rotor diameter of the Enercon E-126 EP3 3.5MW is 127 m. The rotor area amounts to 12.667 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19 U/min.
The Enercon E-126 EP3 3.5MW is fittet with a direct drive gearbox.
In the generator, Enercon GmbH sets to synchronous. high-pole. The manufacturer has used one generator for the E-126 EP3 3.5MW. The maximum speed of the generator is 19 U/min. The voltage amounts to 530 V. At the mains frequency, the E-126 EP3 3.5MW is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube / hydrid. As corrosion protection for the tower Enercon focuses on coated. Manufacturer of the tower is ATES / Cimtas / SAM.
We have 52 pictures of this wind turbine. Two models has been entered to this wind turbine. There are the models Enercon E-126 EP3 3.5MW - Fair model and Enercon E-126 EP3 3.5MW - Fair model. Power data for the E-126 EP3 3.5MW of Enercon are not stored in the system.
The Enercon E-126 EP3 3.5MW has been listed since 02.09.2017. The last modification of the master data was made on 21.01.2024.
The rated power of Enercon E-126 EP3 3.5MW is 3,50 MW. At a wind speed of 2 m/s, the wind turbine starts its work. the cut-out wind speed is 30 m/s.
The rotor diameter of the Enercon E-126 EP3 3.5MW is 127 m. The rotor area amounts to 12.667 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19 U/min.
The Enercon E-126 EP3 3.5MW is fittet with a direct drive gearbox.
In the generator, Enercon GmbH sets to synchronous. high-pole. The manufacturer has used one generator for the E-126 EP3 3.5MW. The maximum speed of the generator is 19 U/min. The voltage amounts to 530 V. At the mains frequency, the E-126 EP3 3.5MW is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube / hydrid. As corrosion protection for the tower Enercon focuses on coated. Manufacturer of the tower is ATES / Cimtas / SAM.
We have 52 pictures of this wind turbine. Two models has been entered to this wind turbine. There are the models Enercon E-126 EP3 3.5MW - Fair model and Enercon E-126 EP3 3.5MW - Fair model. Power data for the E-126 EP3 3.5MW of Enercon are not stored in the system.
The Enercon E-126 EP3 3.5MW has been listed since 02.09.2017. The last modification of the master data was made on 21.01.2024.
More wind turbines
Enercon E-30 / 330
330,00 kW
Enercon E-12/30
30,00 kW
Enercon E-48
800,00 kW
Enercon E-112/60.114
6,00 MW
Enercon E-30
300,00 kW
Enercon E-66/15.66
1,50 MW
Enercon E-138 EP3 E3
4,26 MW
Enercon E-160 EP5 E1
4,60 MW
Enercon E-44
900,00 kW
Enercon E-92
2,35 MW
Enercon E-138 EP3 E2
4,20 MW
Enercon E-126 EP4
4,20 MW
Enercon E-82 E4 2.350
2,35 MW
Enercon E-16
55,00 kW
Enercon E-115 EP3 E3 4.200
4,20 MW
Enercon E-70 E4 2.000
2,00 MW
Enercon E-40/5.40
500,00 kW
Enercon E-32 / 300
300,00 kW
Enercon E-112/45.114
4,50 MW
Enercon E-175 EP5
6,00 MW