Enercon E-126 EP3 4.0MW

The wind turbine E-126 EP3 4.0MW is a production of Enercon GmbH, a manufacturer from Germany. This manufacturer has been in business since 1984.

The rated power of Enercon E-126 EP3 4.0MW is 4,00 MW. At a wind speed of 2 m/s, the wind turbine starts its work. the cut-out wind speed is 30 m/s.

The rotor diameter of the Enercon E-126 EP3 4.0MW is 127 m. The rotor area amounts to 12.667 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19 U/min.

The Enercon E-126 EP3 4.0MW is fittet with a direct drive gearbox.

In the generator, Enercon GmbH sets to synchronous. high-pole. The manufacturer has used one generator for the E-126 EP3 4.0MW. The maximum speed of the generator is 19 U/min. The voltage amounts to 530 V. At the mains frequency, the E-126 EP3 4.0MW is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube / hydrid - site specific. As corrosion protection for the tower Enercon focuses on coated. Manufacturer of the tower is ATES / Cimtas / SAM.

We have 16 pictures of this wind turbine. One model has been entered to the wind turbine. This is the Enercon E-126 EP3 4.0MW - Fair model. Power data for the E-126 EP3 4.0MW of Enercon are not stored in the system.

The Enercon E-126 EP3 4.0MW has been listed since 30.09.2018. The last modification of the master data was made on 21.01.2024.