Hummer H21.0-60KW

60,00 kW
  • ✔ Power data
  • ✘ Pictures
  • ✘ Models

Pictures

There are no pictures stored

Datasheet

Power

Rated power:60.0 kW
Cut-in wind speed:2.5 m/s
Rated wind speed:9.0 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:50.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-

Rotor

Diameter:21.0 m
Swept area:346.4 m²
Number of blades:3
Rotor speed, max:50.0 U/min
Tipspeed:55 m/s
Type:10m
Material:Fiberglass reinforced composite.Resin Transfer Molding(RTM)
Manufacturer:-
Power density 1:173.2 W/m²
Power density 2:5.8 m²/kW

Gear box

Type:none. direct drive
Stages:-
Ratio:-
Manufacturer:-

Generator

Type:Permanent magnet alternator. SCF technology
Number:1
Speed, max:50.0 U/min
Voltage:660.0 V
Grid connection:inverters
Grid frequency:50/60 Hz
Hersteller:-

Tower

Hub height:site specific m
Type:steel tube
Shape:conical
Corrosion protection:hot dip galvanized
Manufacturer:-

Weight

Single blade:-
Hub:-
Rotor:-
Nacelle:1.5 t
Tower, max:-
Total weight:-

Miscellaneous

Installation:-
Offshore:No
Onshore:Yes

Power curve

Marketplace

1x Tacke TW 60
used, Year 1992, 30m Italy
€ 40.000
1x Tacke TW 60
used, Year 1994, 30m Germany
2x Enercon E-40/5.40
used, 50m Germany
€ 30.000
1x Enercon E-58/10.58
used, Year 2003 Germany
1x Wind World W2700
used United States
€ 48.000
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
2x Enercon E-48
used, Year 2005, 50m Germany
1x General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N 90/2500
used, Year 2009, 80m Germany
€ 360.000
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
2x Bonus B54/1000
used, Year 1998, 70m Germany
€ 99.000
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Enercon E-32 / 300
used
€ 32.000
1x WinWinD WWD-1 D60
used, Year 2004, 60m
€ 40.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
powered by wind-turbine.com

Models

There are no models to this Windturbine.

Description

The wind turbine H21.0-60KW is a production of Anhui Hummer Dynamo Co., Ltd., a manufacturer from China.

The rated power of Hummer H21.0-60KW is 60,00 kW. At a wind speed of 2,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Hummer H21.0-60KW is 21 m. The rotor area amounts to 346,36 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 50 U/min.

The Hummer H21.0-60KW is fittet with a none. direct drive gearbox.

In the generator, Anhui Hummer Dynamo Co., Ltd. sets to Permanent magnet alternator. SCF technology. The manufacturer has used one generator for the H21.0-60KW. The maximum speed of the generator is 50 U/min. The voltage amounts to 660 V. At the mains frequency, the H21.0-60KW is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Hummer focuses on hot dip galvanized.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the H21.0-60KW from the Hummer in the system. You can see the powercurve in the diagram above.

The Hummer H21.0-60KW has been listed since 21.07.2017.

More wind turbines

Hummer H25.0-200KW
200,00 kW
Hummer H25.0-100KW
100,00 kW
Hummer H17.0-50KW
50,00 kW
Hummer H21.0-100KW
100,00 kW
Hummer H13.2-30KW
30,00 kW
Hummer H6.4-5KW
5,00 kW
Hummer H8.16-10KW
10,00 kW
Hummer H25.0-60KW
60,00 kW
Hummer H13.2-20KW
20,00 kW
Gamesa G58
850,00 kW
Windey WD88-1500
1,50 MW
WIPO WINForce 10kW
10,00 kW
Eozen EOZEN 1500/82
1,50 MW
Wind World W2320/160
160,00 kW
STORK HAT-25 experimental machine
300,00 kW
DANREGN Bonus 55
55,00 kW
Bonus B19/120
120,00 kW
British Enfield Co. Andreau Enfield
100,00 kW
Fuhrländer FL 1000
1,00 MW
Newinco 19 PI 100
100,00 kW