Hummer H17.0-50KW
50,00 kW
- ✔ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
| Rated power: | 50.0 kW |
| Flexible power ratings: | - |
| Cut-in wind speed: | 3.5 m/s |
| Rated wind speed: | 9.5 m/s |
| Cut-out wind speed: | 20.0 m/s |
| Survival wind speed: | 50.0 m/s |
| Wind zone (DIBt): | - |
| Wind class (IEC): | - |
Rotor
| Diameter: | 17.0 m |
| Swept area: | 227.0 m² |
| Number of blades: | 3 |
| Rotor speed, max: | 85.0 U/min |
| Tipspeed: | 76 m/s |
| Type: | 8m |
| Material: | Fiberglass reinforced composite.RTM |
| Manufacturer: | - |
| Power density 1: | 220.3 W/m² |
| Power density 2: | 4.5 m²/kW |
Gear box
| Type: | none. direct drive |
| Stages: | - |
| Ratio: | - |
| Manufacturer: | - |
Generator
| Type: | Permanent magnet alternator. SCF technology |
| Number: | 1 |
| Speed, max: | 85.0 U/min |
| Voltage: | 660.0 V |
| Grid connection: | inverters |
| Grid frequency: | 50/60 Hz |
| Manufacturer: | - |
Tower
| Hub height: | site specific m |
| Type: | steel tube |
| Shape: | conical |
| Corrosion protection: | hot dip galvanized |
| Manufacturer: | - |
Weight
| Single blade: | - |
| Hub: | - |
| Rotor: | - |
| Nacelle: | 1.3 t |
| Tower, max: | - |
| Total weight: | - |
Miscellaneous
| Installation: | - |
| Offshore: | No |
| Onshore: | Yes |
Power curve
Marketplace
1x Atlantic Orient AOC 15/50
used, 20m Netherlands
€ 60.500
2x Atlantic Orient AOC 15/50
used, Year 2002, 20m United Kingdom
€ 56.795
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
1x GE General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
1x Nordex N60
used, Year 1997, 69m Germany
1x Vestas V25
used, Year 1994, 30m Germany
4x Vestas V27 WindWorld Tårn
used, Year 1994, 30m Germany
2x enair E70 PRO
used
€ 4.150.000
2x Vestas V47
used, Year 1999, 55m Sweden
€ 74.000
1x Vestas V42
used
powered by wind-turbine.com
Service company for Hummer H17.0-50KW
Models
There are no models to this Windturbine.
Description
The wind turbine H17.0-50KW is a production of Anhui Hummer Dynamo Co., Ltd., a manufacturer from China.
The rated power of Hummer H17.0-50KW is 50,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.
The rotor diameter of the Hummer H17.0-50KW is 17 m. The rotor area amounts to 226,98 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 85 U/min.
The Hummer H17.0-50KW is fittet with a none. direct drive gearbox.
In the generator, Anhui Hummer Dynamo Co., Ltd. sets to Permanent magnet alternator. SCF technology. The manufacturer has used one generator for the H17.0-50KW. The maximum speed of the generator is 85 U/min. The voltage amounts to 660 V. At the mains frequency, the H17.0-50KW is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Hummer focuses on hot dip galvanized.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the H17.0-50KW from the Hummer in the system. You can see the powercurve in the diagram above.
The Hummer H17.0-50KW has been listed since 22.07.2017.
The rated power of Hummer H17.0-50KW is 50,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 20 m/s.
The rotor diameter of the Hummer H17.0-50KW is 17 m. The rotor area amounts to 226,98 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 85 U/min.
The Hummer H17.0-50KW is fittet with a none. direct drive gearbox.
In the generator, Anhui Hummer Dynamo Co., Ltd. sets to Permanent magnet alternator. SCF technology. The manufacturer has used one generator for the H17.0-50KW. The maximum speed of the generator is 85 U/min. The voltage amounts to 660 V. At the mains frequency, the H17.0-50KW is at 50 Hz.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Hummer focuses on hot dip galvanized.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the H17.0-50KW from the Hummer in the system. You can see the powercurve in the diagram above.
The Hummer H17.0-50KW has been listed since 22.07.2017.
More wind turbines
Hummer H21.0-60KW
60,00 kW
Hummer H25.0-100KW
100,00 kW
Hummer H8.16-10KW
10,00 kW
Hummer H25.0-200KW
200,00 kW
Hummer H13.2-20KW
20,00 kW
Hummer H6.4-5KW
5,00 kW
Hummer H13.2-30KW
30,00 kW
Hummer H25.0-60KW
60,00 kW
Hummer H21.0-100KW
100,00 kW
Enercon E-12
30,00 kW
REpower MM100/2.0
2,00 MW
GET Danwin 600/41
600,00 kW
Aeolos Aeolos-V 10kW
10,00 kW
Calorius type 37
3,50 kW
Wincon W110/XT
105,00 kW
aerodyn aM 5.0/139
5,00 MW
Micon M 600/250
250,00 kW
Dongfang G2000-127 geared
2,00 MW
XEMC DARWIND XE93
2,00 MW
Goldwind GW 121/2500
2,50 MW