Hummer H8.16-10KW

10,00 kW Small wind turbine
  • ✔ Power data
  • ✘ Pictures
  • ✘ Models

Pictures

There are no pictures stored

Datasheet

Power

Rated power:
10.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.0 m/s
Rated wind speed:
11.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
50.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-

Rotor

Diameter:
8.2 m
Swept area:
50.3 m²
Number of blades:
3
Rotor speed, max:
100.0 U/min
Tipspeed:
43 m/s
Type:
3.95m
Material:
Fiberglass reinforced composite
Manufacturer:
-
Power density 1:
198.8 W/m²
Power density 2:
5.0 m²/kW

Gear box

Type:
none. direct drive
Stages:
-
Ratio:
-
Manufacturer:
-

Generator

Type:
Permanent magent alternator.SCF technology
Number:
1
Speed, max:
100.0 U/min
Voltage:
400.0 V
Grid connection:
inverters
Grid frequency:
50/60 Hz
Manufacturer:
-

Tower

Hub height:
site specific m
Type:
steel tube
Shape:
conical
Corrosion protection:
hot dip galvanized
Manufacturer:
-

Weight

Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
0.5 t
Tower, max:
-
Total weight:
-

Miscellaneous

Installation:
-
Offshore:
No
Onshore:
Yes

Power curve

Marketplace

powered by wind-turbine.com

Service company for Hummer H8.16-10KW

Dismantling of wind power plants

Companies for deconstruction

Further operation

Find transport for wind energy

Crane & Tower Crane

Companies for further operation

Models

There are no models to this Windturbine.

Description

The wind turbine H8.16-10KW is a production of Anhui Hummer Dynamo Co., Ltd., a manufacturer from China.

The rated power of Hummer H8.16-10KW is 10,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Hummer H8.16-10KW is 8,16 m. The rotor area amounts to 50,3 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 100 U/min.

The Hummer H8.16-10KW is fittet with a none. direct drive gearbox.

In the generator, Anhui Hummer Dynamo Co., Ltd. sets to Permanent magent alternator.SCF technology. The manufacturer has used one generator for the H8.16-10KW. The maximum speed of the generator is 100 U/min. The voltage amounts to 400 V. At the mains frequency, the H8.16-10KW is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Hummer focuses on hot dip galvanized.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the H8.16-10KW from the Hummer in the system. You can see the powercurve in the diagram above.

The Hummer H8.16-10KW has been listed since 22.07.2017.

More wind turbines

Hummer H21.0-100KW
100,00 kW
Hummer H25.0-200KW
200,00 kW
Hummer H25.0-60KW
60,00 kW
Hummer H13.2-20KW
20,00 kW
Hummer H21.0-60KW
60,00 kW
Hummer H17.0-50KW
50,00 kW
Hummer H13.2-30KW
30,00 kW
Hummer H25.0-100KW
100,00 kW
Hummer H6.4-5KW
5,00 kW
Vestas V164-9.5
9,50 MW
Nordex N52
800,00 kW
Tozzi Green Victory 24-60
59,90 kW
Aeronautica 47-750
750,00 kW
Alstom Haliade 150
6,00 MW
Vergnet GEV 15/60
60,00 kW
SANY SE10015
1,50 MW
Windey WD88-1500
1,50 MW
eno energy eno 114 4.8
4,80 MW
Shanghai Electric W3600-122
3,60 MW
MingYang MY2.0/110 - MY2000/110
2,00 MW