WEG Wind EnergyGroup WEG MS-3

300,00 kW
  • ✔ Power data
  • ✔ 38 Pictures
  • ✘ Models



Rated power:300.0 kW
Flexible power ratings:-
Cut-in wind speed:5.0 m/s
Rated wind speed:11.5 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:60.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:33.0 m
Swept area:855.0 m²
Number of blades:2
Rotor speed, max:48.0 U/min
Tipspeed:83 m/s
Type:NASA LS-1
Manufacturer:Composite Technology
Power density 1:350.9 W/m²
Power density 2:2.9 m²/kW

Gear box



Type:induction or synchronous
Speed, max:1,836.0 U/min
Voltage:480.0 V
Grid connection:Thyristor
Grid frequency:60.0 Hz
Manufacturer:Brook Compton


Hub height:25/30 m
Type:tapered galvanised steel
Corrosion protection:Hot dip-galvanized


Single blade:1.0 t
Nacelle:11.5 t
Tower, max:13.0 t
Total weight:24.5 t



Power curve


1x Nordtank NTK 300
new, 30m Italy
€ 150.000
1x Tacke TW 300
used, Year 1994, 50m Germany
€ 150.000
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
5x Nordtank NTK 300
used, Year 2014, 30m Italy
€ 130.000
2x Bonus B31/300
used, Year 1991, 30m
2x Bonus B31/300
used, Year 1994, 30m
1x WindMaster / HMZ WM 300/28
used, 35m
3x Bonus B31/300
used, Year 1992, 30m Germany
€ 40.000
4x Enercon E-32 / 300
used, Year 1993 United Kingdom
€ 20.000
1x Nordtank NTK 300
used, Year 1998, 30m
1x Bonus B31/300
used, Year 1986, 24m
1x Enercon E-32 / 300
used, 31m
3x Nordtank NTK 300
used, Year 1993, 35m Finland
€ 80.000
1x Enercon E-32 / 300
used Poland
1x Bonus B31/300
used, 24m
1x Enercon E-30
used, Year 1996, 48m
€ 25.000
1x Enercon E-30
used, Year 1998, 50m
1x Enercon E-30
used, Year 1998, 50m
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
powered by wind-turbine.com

Service company for WEG Wind EnergyGroup WEG MS-3


There are no models to this Windturbine.


The wind turbine WEG MS-3 is a production of Wind Energy Group (WEG) Ltd., a manufacturer from United Kingdom. This manufacturer has been in business since 1978. Since year 1998, Wind Energy Group (WEG) Ltd. is no longer active. The manufacturer was taken over by NEG Micon A/S.

The rated power of WEG Wind EnergyGroup WEG MS-3 is 300,00 kW. At a wind speed of 5,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the WEG Wind EnergyGroup WEG MS-3 is 33,0 m. The rotor area amounts to 855,0 m². The wind turbine is equipped with 2 rotor blades. The maximum rotor speed is 48,0 U/min.

The WEG Wind EnergyGroup WEG MS-3 is fittet with a spur/planetary gearbox. The gearbox has 2,0 stages. Manufacturer of the transmission is Flender.

In the generator, Wind Energy Group (WEG) Ltd. sets to induction or synchronous. The manufacturer has used one generator for the WEG MS-3. The maximum speed of the generator is 1.836,0 U/min. The voltage amounts to 480,0 V. At the mains frequency, the WEG MS-3 is at 60,0 Hz.

In the construction of the tower, the manufacturer uses tapered galvanised steel. As corrosion protection for the tower WEG Wind EnergyGroup focuses on Hot dip-galvanized. Manufacturer of the tower is Petitjean.

We have 38 pictures of this wind turbine. There are no models for this wind turbine. We have power data on the WEG MS-3 from the WEG Wind EnergyGroup in the system. You can see the powercurve in the diagram above.

The WEG Wind EnergyGroup WEG MS-3 has been listed since 28.06.2013. The last modification of the master data was made on 18.12.2015.

More wind turbines

WEG Wind EnergyGroup LS1
3,00 MW
WEG Wind EnergyGroup WEG MS-4
600,00 kW
WEG Wind EnergyGroup prototypes
WEG Wind EnergyGroup WEG MS-2
250,00 kW
WEG Wind EnergyGroup WEG MS-1
250,00 kW
SANY SE13122
2,20 MW
Enercon E-70 E4 2.000
2,00 MW
Senvion MM82
2,05 MW
MAN Aeroman 12.5
40,00 kW
Nordex N100 Gamma
2,50 MW
HVK Herborg Vestas HVK 55
55,00 kW
Wenergy M 23
22,00 kW
CSIC H123-2.0
2,00 MW
FWT 100/2500
2,50 MW
Köster Adler / pumping station Kaiser Wilhelm Koog
eno energy eno 126 4.8
4,80 MW
WindMaster / HMZ WM 300/25
300,00 kW
Leitwind LTW77 1350
1,35 MW
SANY SE13625
2,50 MW
Enercon E-66/15.66
1,50 MW