Newinco 14 PI 50/65
65,00
kW
Small wind turbine
- ✘ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
65.0 kW
Flexible power ratings:
-
Cut-in wind speed:
4.0 m/s
Rated wind speed:
-
Cut-out wind speed:
25.0 m/s
Survival wind speed:
-
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
13.8 m
Swept area:
149.6 m²
Number of blades:
3
Rotor speed, max:
-
Tipspeed:
-
Type:
NACA
Material:
fibreglass
Manufacturer:
Stork
Power density 1:
434.5 W/m²
Power density 2:
2.3 m²/kW
Gear box
Type:
-
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
asynchronous
Number:
-
Speed, max:
-
Voltage:
-
Grid connection:
-
Grid frequency:
-
Manufacturer:
-
Tower
Hub height:
-
Type:
steel tube
Shape:
conical
Corrosion protection:
painted
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
powered by wind-turbine.com
Service company for Newinco 14 PI 50/65
Dismantling of wind power plants
Companies for deconstructionFurther operation
Find transport for wind energyCrane & Tower Crane
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine 14 PI 50/65 is a production of Newinco B.V., a manufacturer from Netherlands. Since year 1990, Newinco B.V. is no longer active. The manufacturer was taken over by NedWind Rhenen bV .
The rated power of Newinco 14 PI 50/65 is 65,00 kW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Newinco 14 PI 50/65 is 13,8 m. The rotor area amounts to 149,6 m². The wind turbine is equipped with 3 rotor blades.
In the generator, Newinco B.V. sets to asynchronous.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Newinco focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the 14 PI 50/65 of Newinco are not stored in the system.
The Newinco 14 PI 50/65 has been listed since 28.03.2015. The last modification of the master data was made on 28.03.2015.
The rated power of Newinco 14 PI 50/65 is 65,00 kW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Newinco 14 PI 50/65 is 13,8 m. The rotor area amounts to 149,6 m². The wind turbine is equipped with 3 rotor blades.
In the generator, Newinco B.V. sets to asynchronous.
In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Newinco focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the 14 PI 50/65 of Newinco are not stored in the system.
The Newinco 14 PI 50/65 has been listed since 28.03.2015. The last modification of the master data was made on 28.03.2015.
More wind turbines
Newinco 10 PI 20
20,00 kW
Newinco 34 PI 500
500,00 kW
Newinco 14 PS 50
50,00 kW
Newinco 17 PI 85/100
100,00 kW
Newinco 19 PI 100
100,00 kW
Newinco 17 PS 85
85,00 kW
Newinco 25 PI 250
250,00 kW
Newinco 23 PI 200/250
250,00 kW
Newinco 25 PI 250 small tower
250,00 kW
DWT Danish Wind Tech Windane 29
265,00 kW
Vestas V162-6.2 EnVentus
6,20 MW
CSIC H151-5.0
5,00 MW
XEMC DARWIND XD115 5.0
5,00 MW
USW U.S. Windpower 56-100
100,00 kW
Venturicon 3.ZERO
3,17 kW
Hanjin HJWT1500/77
1,50 MW
Neyrpic Saint-Rémy-des-Landes 1000kW
1,00 MW
Micon M 450
200,00 kW
Fuhrländer LLC WTU2.5-100
2,50 MW
Goldwind GW 171/6000
6,00 MW