Cannon 26/250
250,00
kW
- ✔ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
250.0 kW
Flexible power ratings:
-
Cut-in wind speed:
4.8 m/s
Rated wind speed:
-
Cut-out wind speed:
28.9 m/s
Survival wind speed:
50.6 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
26.0 m
Swept area:
531.0 m²
Number of blades:
3
Rotor speed, max:
-
Tipspeed:
-
Type:
13m LS(1)
Material:
fiberglass reinforced with epoxy and polyester
Manufacturer:
-
Power density 1:
470.8 W/m²
Power density 2:
2.1 m²/kW
Gear box
Type:
parallel shafts with helical-cut teeth
Stages:
2.0
Ratio:
1:33
Manufacturer:
-
Generator
Type:
induction
Number:
1
Speed, max:
1,500.0 U/min
Voltage:
380.0 V
Grid connection:
thyristors
Grid frequency:
50/60 Hz
Manufacturer:
-
Tower
Hub height:
42.7 m
Type:
lattice
Shape:
-
Corrosion protection:
hot dip galvanized
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
Marketplace
2x HSW Husumer Schiffs. HSW 250
used Poland
€ 190.000
1x HSW Husumer Schiffs. HSW 250
used, Year 1983, 30m Poland
€ 25
2x Wincon W250/29
used, Year 2011, 50m India
€ 133.000
2x HSW Husumer Schiffs. HSW 250
used, Year 1990, 28m Poland
€ 104.000
3x HSW Husumer Schiffs. HSW 250
used, Year 1995, 30m Poland
€ 35.000
1x Vestas V20
used, Year 1988, 24m
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
25x Suzlon S 66-1250
used, Year 2007, 56m India
€ 13.965.000
4x Enercon E-32 / 300
used, Year 1993, 30m Ireland
€ 20.000
2x Nordex N27/150
used, Year 1998, 30m Ireland
€ 61.843
2x RRB Energy V27-225
used, 30m Ireland
€ 133.783
2x Nordex N29
used, 30m Ireland
€ 74.464
1x NEG Micon NM 44/750
used, 12m China
€ 890.900
4x Bonus B44/600
used, Year 1999, 1m Spain
1x Enercon E-32 / 300
used, 31m Bulgaria
3x NEG Micon NM 92/2750
used, Year 2004, 80m Netherlands
€ 1.200.000
1x NEG Micon NM 60/1000
used, Year 2001, 70m Poland
2x Gamesa G87
used, Year 2005, 78m Spain
1x Vestas V80 Offshore
used, Year 2014, 100m Poland
€ 24
2x Nordex N80 Alpha
used, Year 2002, 80m Germany
powered by wind-turbine.com
Service company for Cannon 26/250
Logistics & transport
Companies for logistics & transportationDismantling of wind turbines
Companies for dismantlingFurther operation
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine 26/250 is a production of Cannon Energy Corporation, a manufacturer from United States. Cannon Energy Corporation is no longer active.
The rated power of Cannon 26/250 is 250,00 kW. At a wind speed of 4,8 m/s, the wind turbine starts its work. the cut-out wind speed is 28,9 m/s.
The rotor diameter of the Cannon 26/250 is 26 m. The rotor area amounts to 531 m². The wind turbine is equipped with 3 rotor blades.
The Cannon 26/250 is fittet with a parallel shafts with helical-cut teeth gearbox. The gearbox has 2 stages.
In the generator, Cannon Energy Corporation sets to induction. The manufacturer has used one generator for the 26/250. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 380 V. At the mains frequency, the 26/250 is at 50 Hz.
In the construction of the tower, the manufacturer uses lattice. As corrosion protection for the tower Cannon focuses on hot dip galvanized.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the 26/250 from the Cannon in the system. You can see the powercurve in the diagram above.
The Cannon 26/250 has been listed since 20.12.2015.
The rated power of Cannon 26/250 is 250,00 kW. At a wind speed of 4,8 m/s, the wind turbine starts its work. the cut-out wind speed is 28,9 m/s.
The rotor diameter of the Cannon 26/250 is 26 m. The rotor area amounts to 531 m². The wind turbine is equipped with 3 rotor blades.
The Cannon 26/250 is fittet with a parallel shafts with helical-cut teeth gearbox. The gearbox has 2 stages.
In the generator, Cannon Energy Corporation sets to induction. The manufacturer has used one generator for the 26/250. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 380 V. At the mains frequency, the 26/250 is at 50 Hz.
In the construction of the tower, the manufacturer uses lattice. As corrosion protection for the tower Cannon focuses on hot dip galvanized.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the 26/250 from the Cannon in the system. You can see the powercurve in the diagram above.
The Cannon 26/250 has been listed since 20.12.2015.
More wind turbines
TUGE 10 kW
10,00 kW
Sinovel SL3000/113
3,00 MW
Fuhrländer FL 20
20,00 kW
Dencon 95/17
95,00 kW
Storm Master Storm Master Model 12
40,00 kW
Siemens Gamesa SG 11.0-200 DD
11,00 MW
MingYang MY1.5/77 - MY1500/77
1,50 MW
Nordic Windpower AB Nordic 400
400,00 kW
Leitwind LTW77 1500
1,50 MW
Alstom ECO 80/2000
2,00 MW
MingYang MySE3.0-135
3,00 MW
Ventis V20 100
100,00 kW
HAG ET500/37
500,00 kW
Fortis Montana 5 kW
5,00 kW
Goldwind GW 182 / 7200
7,20 MW
CSR WT5000-D128
5,00 MW
WinWinD WWD-1 D64
1,00 MW
Leitwind LTW104 2000
2,00 MW
REpower MD70
1,50 MW
Beck Ballum Smedemester 22kW
22,00 kW