Made - Endesa AE-23

180,00 kW
  • ✘ Power data
  • ✔ 12 Pictures
  • ✘ Models

Datasheet

Power

Rated power:180.0 kW
Flexible power ratings:-
Cut-in wind speed:3.5 m/s
Rated wind speed:14.0 m/s
Cut-out wind speed:28.0 m/s
Survival wind speed:-
Wind zone (DIBt):-
Wind class (IEC):-

Rotor

Diameter:23.0 m
Swept area:415.0 m²
Number of blades:3
Rotor speed, max:43.0 U/min
Tipspeed:52 m/s
Type:-
Material:GFRP
Manufacturer:-
Power density 1:433.7 W/m²
Power density 2:2.3 m²/kW

Gear box

Type:Spur
Stages:-
Ratio:-
Manufacturer:-

Generator

Type:Asynchronus
Number:-
Speed, max:-
Voltage:380.0 V
Grid connection:Thyristor
Grid frequency:50 Hz
Hersteller:-

Tower

Hub height:28 m
Type:Steel tube
Shape:conical
Corrosion protection:painted
Manufacturer:-

Weight

Single blade:-
Hub:-
Rotor:-
Nacelle:11.0 t
Tower, max:12.3 t
Total weight:23.3 t

Miscellaneous

Installation:-
Offshore:No
Onshore:Yes

Power curve

There are no power data deposited for this turbine.

Marketplace

1x Made - Endesa AE-45
used, 41m Spain
€ 70.000
1x Made - Endesa AE-30
used, Year 1999, 31m
€ 110.000
1x Danwin Danwin 24/180
used, Year 1994, 30m Germany
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
1x General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
8x Bonus B23/150 Gittermast
used, 30m Poland
4x Bonus B23/150 Gittermast
used Poland
1x Nordex N60
used, Year 1997, 69m Germany
1x Vestas V25
used, Year 1994, 30m Germany
4x Vestas V27 WindWorld Tårn
used, Year 1994, 30m Germany
2x enair E70 PRO
used
€ 4.150.000
powered by wind-turbine.com

Models

There are no models to this Windturbine.

Description

The wind turbine AE-23 is a production of Made - Endesa, a manufacturer from Spain. Since year 2003, Made - Endesa is no longer active. The manufacturer was taken over by Gamesa Corporación Tecnológica (Grupo Auxiliar MEtalurgico, SA).

The rated power of Made - Endesa AE-23 is 180,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 28 m/s.

The rotor diameter of the Made - Endesa AE-23 is 23 m. The rotor area amounts to 415 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 43 U/min.

The Made - Endesa AE-23 is fittet with a Spur gearbox.

In the generator, Made - Endesa sets to Asynchronus. The voltage amounts to 380 V. At the mains frequency, the AE-23 is at 50 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Made - Endesa focuses on painted.

We have 12 pictures of this wind turbine. There are no models for this wind turbine. Power data for the AE-23 of Made - Endesa are not stored in the system.

The Made - Endesa AE-23 has been listed since 11.05.2013. The last modification of the master data was made on 18.09.2014.

More wind turbines

Made - Endesa AE-52
800,00 kW
Made - Endesa AE-20 Prototype
150,00 kW
Made - Endesa AE-56
800,00 kW
Made - Endesa AE-52 Prototype
800,00 kW
Made - Endesa AE-30
330,00 kW
Made - Endesa AE-61/1.100
1,10 MW
Made - Endesa AE-32
330,00 kW
Made - Endesa GESA-110
110,00 kW
Made - Endesa GESA-30
30,00 kW
Made - Endesa AE-46/I
660,00 kW
Made - Endesa AE-20
150,00 kW
Made - Endesa AE-45
600,00 kW
Made - Endesa AE-61
1,32 MW
Made - Endesa AE-59
800,00 kW
ReGen Powertech VENSYS 77
1,50 MW
CATUM CA-2.0 MW-WD R93
2,00 MW
K.M. Vindmøller KM-T 103
11,00 kW
Vergnet GEV HP 1000/58
1,00 MW
Siemens SWT-3.6-107 Onshore
3,60 MW
Envision EN130-4.0
4,00 MW