Made - Endesa AE-45
- ✘ Power data
- ✘ Pictures
- ✘ Models
The rated power of Made - Endesa AE-45 is 600,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the Made - Endesa AE-45 is 45 m. The rotor area amounts to 1.590 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 26,5 U/min.
The Made - Endesa AE-45 is fittet with a spur/planetary gearbox. The gearbox has 3 stages. Manufacturer of the transmission is Ehesa.
In the generator, Made - Endesa sets to Asynchronus. The manufacturer has used one generator for the AE-45. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 690 V. At the mains frequency, the AE-45 is at 50 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Made - Endesa focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the AE-45 of Made - Endesa are not stored in the system.
The Made - Endesa AE-45 has been listed since 11.05.2013. The last modification of the master data was made on 02.07.2017.