Kähler Maschinenbau KANO Rotor
30,00
kW
Small wind turbine
- ✘ Power data
- ✔ 53 Pictures
- ✘ Models
Pictures
Datasheet
Power
Rated power:
30.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.0 m/s
Rated wind speed:
13.0 m/s
Cut-out wind speed:
22.0 m/s
Survival wind speed:
60.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
13.0 m
Swept area:
132.0 m²
Number of blades:
3
Rotor speed, max:
55.0 U/min
Tipspeed:
37 m/s
Type:
NACA 44
Material:
Wood
Manufacturer:
Born Kükels
Power density 1:
227.3 W/m²
Power density 2:
4.4 m²/kW
Gear box
Type:
Spur
Stages:
3.0
Ratio:
1:27
Manufacturer:
Flender
Generator
Type:
Asynchronus
Number:
1.0
Speed, max:
1,500.0 U/min
Voltage:
400.0 V
Grid connection:
Thyristor
Grid frequency:
50.0 Hz
Manufacturer:
Schorch/VEM
Tower
Hub height:
30.5 m
Type:
Lattice
Shape:
-
Corrosion protection:
-
Manufacturer:
Kähler Maschinenbau
Weight
Single blade:
0.1 t
Hub:
-
Rotor:
0.5 t
Nacelle:
3.0 t
Tower, max:
5.3 t
Total weight:
8.8 t
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x Fuhrländer FL 30
used, 24m Spain
45x MHI Vestas Offshore V117-4.2 MW
used, Year 1987, 42m United States
€ 35.000
1x NEG Micon NM 48/750
used, Year 2000, 60m Germany
1x enair E30 PRO
used, Year 1995 Germany
1x Vestas V52
used, 74m Italy
1x Bonus B33/300
used, Year 1998, 40m Germany
3x Vestas V27
new Germany
1x Tacke TW 300
used, Year 1995, 50m Germany
€ 10.000
1x NEG Micon NM 48/600
used, Year 1998 Poland
€ 24.000
1x NEG Micon NM 48/750
used Germany
1x DeWind D6 62/1000
used, Year 2003 Germany
1x NEG Micon NM 43/600
used, Year 1999, 43m Finland
2x ecotècnia ECO 20/150
used Poland
2x Nordex N62
used, Year 2000, 80m Germany
€ 300.000
2x Bonus B62/1300
used Germany
1x Senvion MM82
used, 59m Germany
9x Senvion MM82
used, Year 2009, 59m Germany
1x Nordtank NTK 300
used, 30m Poland
€ 62.000
1x Enercon E-48
used Turkey
1x Vestas V29
used, 31m
powered by wind-turbine.com
Service company for Kähler Maschinenbau KANO Rotor
Dismantling of wind power plants
Companies for deconstructionFurther operation
Find transport for wind energyCrane & Tower Crane
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine KANO Rotor is a production of Kähler Maschinenbau GmbH, a manufacturer from Germany. Kähler Maschinenbau GmbH is no longer active.
The rated power of Kähler Maschinenbau KANO Rotor is 30,00 kW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 22,0 m/s.
The rotor diameter of the Kähler Maschinenbau KANO Rotor is 13,0 m. The rotor area amounts to 132,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 55,0 U/min.
The Kähler Maschinenbau KANO Rotor is fittet with a Spur gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Flender.
In the generator, Kähler Maschinenbau GmbH sets to Asynchronus. The manufacturer has used one generator for the KANO Rotor. The maximum speed of the generator is 1.500,0 U/min. The voltage amounts to 400,0 V. At the mains frequency, the KANO Rotor is at 50,0 Hz.
In the construction of the tower, the manufacturer uses Lattice. Manufacturer of the tower is Kähler Maschinenbau.
We have 53 pictures of this wind turbine. There are no models for this wind turbine. Power data for the KANO Rotor of Kähler Maschinenbau are not stored in the system.
The Kähler Maschinenbau KANO Rotor has been listed since 27.08.2012. The last modification of the master data was made on 14.12.2013.
The rated power of Kähler Maschinenbau KANO Rotor is 30,00 kW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 22,0 m/s.
The rotor diameter of the Kähler Maschinenbau KANO Rotor is 13,0 m. The rotor area amounts to 132,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 55,0 U/min.
The Kähler Maschinenbau KANO Rotor is fittet with a Spur gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Flender.
In the generator, Kähler Maschinenbau GmbH sets to Asynchronus. The manufacturer has used one generator for the KANO Rotor. The maximum speed of the generator is 1.500,0 U/min. The voltage amounts to 400,0 V. At the mains frequency, the KANO Rotor is at 50,0 Hz.
In the construction of the tower, the manufacturer uses Lattice. Manufacturer of the tower is Kähler Maschinenbau.
We have 53 pictures of this wind turbine. There are no models for this wind turbine. Power data for the KANO Rotor of Kähler Maschinenbau are not stored in the system.
The Kähler Maschinenbau KANO Rotor has been listed since 27.08.2012. The last modification of the master data was made on 14.12.2013.
More wind turbines
Micon M 1100-600
600,00 kW
Windey WD121-2000
2,00 MW
Enerwings Albatros
200,00 kW
Gamesa G128-5.0MW Offshore
5,00 MW
AN Bonus 450/36
450,00 kW
Mitsubishi MWT-250G
300,00 kW
Seewind S 25 132
132,00 kW
ADES ADES 335
335,00 kW
MHI Vestas Offshore V112-3.3 MW
3,30 MW
WEG AGW 172/7.X
7,00 MW
Osiris Energy Osiris 1,6
1,60 kW
AMSC wt5500fc TC I
5,50 MW
Lagerwey L160 LP4
4,00 MW
Mitsubishi MWT-500
500,00 kW
EOLYS METRONOME 12 KW
10,00 kW
Solid Wind SWP-20
20,00 kW
Hyundai HQ1650/77
1,65 MW
bwu MD70
1,50 MW
REpower 6.2M126 Offshore
6,15 MW
ITALIA VAWT Prototype
15,00 kW