Windkraft-Zentrale elektrOmat 10kW / 3 blade version

10,00 kW Small wind turbine
  • ✘ Power data
  • ✔ 19 Pictures
  • ✘ Models

Datasheet

Power

Rated power:
10.0 kW
Flexible power ratings:
-
Cut-in wind speed:
4.0 m/s
Rated wind speed:
12.0 m/s
Cut-out wind speed:
48.0 m/s
Survival wind speed:
58.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-

Rotor

Diameter:
10.0 m
Swept area:
78.0 m²
Number of blades:
3
Rotor speed, max:
70.0 U/min
Tipspeed:
37 m/s
Type:
4.8m NACA 4415.26
Material:
GFRP with epoxy resin
Manufacturer:
-
Power density 1:
128.2 W/m²
Power density 2:
7.8 m²/kW

Gear box

Type:
coaxial helical
Stages:
2.0
Ratio:
1:25
Manufacturer:
-

Generator

Type:
inner pole synchronous. 4-pol
Number:
1
Speed, max:
1,500.0 U/min
Voltage:
380.0 V
Grid connection:
grid-controlled inverter
Grid frequency:
50. variable Hz
Manufacturer:
-

Tower

Hub height:
14 m
Type:
lattice
Shape:
pyramid
Corrosion protection:
hot dip galvanized
Manufacturer:
-

Weight

Single blade:
0.1 t
Hub:
0.2 t
Rotor:
0.4 t
Nacelle:
1.0 t
Tower, max:
1.7 t
Total weight:
3.0 t

Miscellaneous

Installation:
1985
Offshore:
No
Onshore:
Yes

Power curve

There are no power data deposited for this turbine.

Marketplace

powered by wind-turbine.com

Service company for Windkraft-Zentrale elektrOmat 10kW / 3 blade version

Dismantling of wind power plants

Companies for deconstruction

Further operation

Find transport for wind energy

Crane & Tower Crane

Companies for further operation

Models

There are no models to this Windturbine.

Description

The wind turbine elektrOmat 10kW / 3 blade version is a production of Windkraft-Zentrale, a manufacturer from Germany. Windkraft-Zentrale is no longer active. The manufacturer was taken over by Fuhrländer AG.

The rated power of Windkraft-Zentrale elektrOmat 10kW / 3 blade version is 10,00 kW. At a wind speed of 4 m/s, the wind turbine starts its work. the cut-out wind speed is 48 m/s.

The rotor diameter of the Windkraft-Zentrale elektrOmat 10kW / 3 blade version is 10 m. The rotor area amounts to 78 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 70 U/min.

The Windkraft-Zentrale elektrOmat 10kW / 3 blade version is fittet with a coaxial helical gearbox. The gearbox has 2 stages.

In the generator, Windkraft-Zentrale sets to inner pole synchronous. 4-pol. The manufacturer has used one generator for the elektrOmat 10kW / 3 blade version. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 380 V. At the mains frequency, the elektrOmat 10kW / 3 blade version is at 50,000000000 Hz.

In the construction of the tower, the manufacturer uses lattice. As corrosion protection for the tower Windkraft-Zentrale focuses on hot dip galvanized.

We have 19 pictures of this wind turbine. There are no models for this wind turbine. Power data for the elektrOmat 10kW / 3 blade version of Windkraft-Zentrale are not stored in the system.

The Windkraft-Zentrale elektrOmat 10kW / 3 blade version has been listed since 07.06.2020.

More wind turbines

Windkraft-Zentrale elektrOmat 20kW
20,00 kW
Windkraft-Zentrale elektrOmat 12kW
12,00 kW
Windkraft-Zentrale elektrOmat 0,3kW HD312
0,30 kW
Windkraft-Zentrale elektrOmat 10kW
10,00 kW
Windkraft-Zentrale elektrOmat 25kW
25,00 kW
Windkraft-Zentrale elektrOmat 0,2kW HD212
0,20 kW
Krampitz KK
18,00 kW
Envision EN130-4.2
4,20 MW
SANY SE13625
2,50 MW
ADES ADES 200
200,00 kW
Enercon E-36
400,00 kW
Lagerwey LW 27/250
250,00 kW
Smedemester Mølle Smedemestermolle
22,00 kW
W2E Wind to Energy W2E-100/2.0
2,05 MW
Lagerwey LW 15/75
75,00 kW
Aeronautica 54-750
750,00 kW
Swiss Electric YZ121/2.0
2,00 MW
Goldwind GW 100/2500
2,50 MW
Heidelberg Motor GmbH HM1000
1,00 MW
Seewind S 25 132
132,00 kW