Windkraft-Zentrale elektrOmat 20kW

20,00 kW
  • ✘ Power data
  • ✔ 10 Pictures
  • ✘ Models



Rated power:20.0 kW
Cut-in wind speed:3.0 m/s
Rated wind speed:11.0 m/s
Cut-out wind speed:30.0 m/s
Survival wind speed:67.0 m/s
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:10.0 m
Swept area:86.0 m²
Number of blades:3
Rotor speed, max:70.0 U/min
Tipspeed:37 m/s
Power density 1:232.6 W/m²
Power density 2:4.3 m²/kW

Gear box



Speed, max:1,500.0 U/min
Voltage:380.0 V
Grid connection:thyristor
Grid frequency:50 Hz


Hub height:14 m
Corrosion protection:galvanized


Single blade:-
Rotor:0.4 t
Nacelle:1.0 t
Tower, max:1.7 t
Total weight:3.0 t



Power curve

There are no power data deposited for this turbine.


5x NEG Micon NM 48/600
used, Year 2000, 50m
6x NEG Micon NM 43/600
used, Year 1999, 70m
6x Nordex N 62
used, Year 2000, 69m
1x Nordex N 60
used, Year 1999, 69m
2x Vestas V 80 Nearshore
used, Year 2003, 60m
1x Vestas V 80 Nearshore
used, Year 2008, 60m
1x Vestas V 80 Nearshore
used, Year 2008, 60m
1x Vestas V 90
used, Year 2005, 80m
2x Enercon E-70 E4 2.300
used, Year 2012, 65m
4x Vestas V 80 Nearshore
used, Year 2004, 60m
2x Vestas V 80 Nearshore
used, Year 2001, 60m
1x Vestas V 80 Nearshore
used, Year 2003
6x Vestas V 47
used, Year 1999, 60m
5x General Electric GE 1.5s
used, Year 2001, 65m
1x Vestas V 66-1.65
used, Year 1999, 60m
1x Enercon E-40/5.40
used, Year 1996, 65m
13x Vestas V 66-1.75
used, Year 2002, 60m
6x Enercon E-70 E4 2.300
used, Year 2009, 63m
4x Vestas V 80 Nearshore
used, Year 2003, 100m
1x Siemens SWT-3.6-107 Offshore
used, Year 2005, 80m
powered by


There are no models to this Windturbine.


The wind turbine elektrOmat 20kW is a production of Windkraft-Zentrale, a manufacturer from Germany. Windkraft-Zentrale is no longer active. The manufacturer was taken over by Fuhrländer AG.

The rated power of Windkraft-Zentrale elektrOmat 20kW is 20,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 30 m/s.

The rotor diameter of the Windkraft-Zentrale elektrOmat 20kW is 10 m. The rotor area amounts to 86 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 70 U/min.

The Windkraft-Zentrale elektrOmat 20kW is fittet with a spur gearbox. The gearbox has 2 stages.

In the generator, Windkraft-Zentrale sets to synchronous. The manufacturer has used one generator for the elektrOmat 20kW. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 380 V. At the mains frequency, the elektrOmat 20kW is at 50 Hz.

In the construction of the tower, the manufacturer uses lattice. As corrosion protection for the tower Windkraft-Zentrale focuses on galvanized.

We have 10 pictures of this wind turbine. There are no models for this wind turbine. Power data for the elektrOmat 20kW of Windkraft-Zentrale are not stored in the system.

The Windkraft-Zentrale elektrOmat 20kW has been listed since 11.04.2017. The last modification of the master data was made on 11.04.2017.

More wind turbines

Windkraft-Zentrale elektrOmat 25kW
25,00 kW
Windkraft-Zentrale elektrOmat 10kW
10,00 kW
Windkraft-Zentrale elektrOmat 12kW
12,00 kW
NEG Micon NM 72/2000 Offshore
2,00 MW
Windmatic WM 10s-22
22,00 kW
HVK Herborg HVK 15
15,00 kW
HVK Herborg HVK 55
55,00 kW
Made - Endesa AE-20
150,00 kW
Vestas V 25
200,00 kW
Goldwind GW 100/2500
2,50 MW
Greenstorm GS 21 S
60,00 kW
Lanzhou LEC-2.0 MW-WD R93
2,00 MW
Soyut Soyut Wind 1
1,00 kW
Tozzi Green Victory 19-20
19,90 kW
Smedemester Mølle Søgren Maskinfabrik A/S
18,00 kW
Bergey BWC Excel 10
10,00 kW
DR ZABER ZEFIR D10 - P12 - T12
12,00 kW
awinco L60-330
60,00 kW
Clipper C96
2,50 MW
Sande B.C. 7,5
7,50 kW