DWT Danish Wind Tech Windane 5

The wind turbine Windane 5 is a production of Danish Wind Technology A/S (DWT), a manufacturer from Denmark. Since year 1989, Danish Wind Technology A/S (DWT) is no longer active. The manufacturer was taken over by Vestas Wind Systems A/S.

The rated power of DWT Danish Wind Tech Windane 5 is 4,00 kW. At a wind speed of 4,5 m/s, the wind turbine starts its work.

The rotor diameter of the DWT Danish Wind Tech Windane 5 is 5 m. The rotor area amounts to 19,6 m². The wind turbine is equipped with 2 rotor blades.

The DWT Danish Wind Tech Windane 5 is fittet with a parallel shaft gearbox. The gearbox has 2 stages. Manufacturer of the transmission is ASEA.

In the generator, Danish Wind Technology A/S (DWT) sets to induction. The manufacturer has used one generator for the Windane 5. The voltage amounts to 380 V. At the mains frequency, the Windane 5 is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower DWT Danish Wind Tech focuses on hot dip galvanized. Manufacturer of the tower is DWT.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the Windane 5 of DWT Danish Wind Tech are not stored in the system.

The DWT Danish Wind Tech Windane 5 has been listed since 30.01.2016. The last modification of the master data was made on 30.01.2016.