DWT Danish Wind Tech Windane 29

The wind turbine Windane 29 is a production of Danish Wind Technology A/S (DWT), a manufacturer from Denmark. Since year 1989, Danish Wind Technology A/S (DWT) is no longer active. The manufacturer was taken over by Vestas Wind Systems A/S.

The rated power of DWT Danish Wind Tech Windane 29 is 265,00 kW. At a wind speed of 5,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the DWT Danish Wind Tech Windane 29 is 29,3 m. The rotor area amounts to 674 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 42 U/min.

The DWT Danish Wind Tech Windane 29 is fittet with a helical with parallel shafts gearbox. The gearbox has 3 stages. Manufacturer of the transmission is ASEA.

In the generator, Danish Wind Technology A/S (DWT) sets to induction. The manufacturer has used one generator for the Windane 29. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 480 V. At the mains frequency, the Windane 29 is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower DWT Danish Wind Tech focuses on hot dip galvanized. Manufacturer of the tower is DWT.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the Windane 29 from the DWT Danish Wind Tech in the system. You can see the powercurve in the diagram above.

The DWT Danish Wind Tech Windane 29 has been listed since 30.01.2016. The last modification of the master data was made on 30.01.2016.