Siemens SWT-3.2-108
3,20
MW
- ✘ Power data
- ✘ Pictures
- ✘ Models
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
3,200.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.0 m/s
Rated wind speed:
11.5 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
59.5 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
108.0 m
Swept area:
9,144.0 m²
Number of blades:
3
Rotor speed, max:
16.0 U/min
Tipspeed:
90 m/s
Type:
B53
Material:
fiberglass-reinforced epoxy
Manufacturer:
Siemens
Power density 1:
350.0 W/m²
Power density 2:
2.9 m²/kW
Buy spares

Buy blades for Siemens SWT-3.2-108
Gear box
Type:
with out. direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Buy spares

Buy gearbox for Siemens SWT-3.2-108
Generator
Type:
Synchronous permanent
Number:
1
Speed, max:
16.0 U/min
Voltage:
690.0 V
Grid connection:
IGBT
Grid frequency:
50 Hz
Manufacturer:
Siemens
Buy spares

Buy generator for Siemens SWT-3.2-108
Tower
Hub height:
79.5 m
Type:
tapered tubular
Shape:
conical
Corrosion protection:
painted
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
60.0 t
Nacelle:
78.0 t
Tower, max:
75.0 t
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
45x MHI Vestas Offshore V117-4.2 MW
used, Year 1987, 42m United States
€ 35.000
1x Nordex N43
used, 40m Germany
1x Nordex N43
used, Year 1998 Germany
1x NEG Micon NM 48/750
used, Year 2000, 60m Germany
1x enair E30 PRO
used, Year 1995 Germany
1x Vestas V52
used, 74m Italy
1x Bonus B33/300
used, Year 1998, 40m Germany
1x Nordex N80 Alpha
used, Year 2000, 80m Germany
€ 120.000
3x Vestas V27
new Germany
1x Tacke TW 300
used, Year 1995, 50m Germany
€ 10.000
1x Wind World W5200/750
used, Year 1999, 74m Poland
€ 60.000
1x AN Bonus 150/30
used, Year 1994, 30m Switzerland
€ 1
1x NEG Micon NM 48/600
used, Year 1998 Poland
€ 24.000
1x NEG Micon NM 48/750
used Germany
1x NEG Micon NM 43/600
used, Year 1999, 43m Finland
1x DeWind D4 48/600
used
1x DeWind D6 62/1000
used, Year 2003 Germany
2x ecotècnia ECO 20/150
used Poland
1x Tacke TW 600
used, Year 1998 Poland
€ 25.000
2x Nordex N62
used, Year 2000, 80m Germany
€ 300.000
powered by wind-turbine.com
Spare parts for Siemens SWT-3.2-108
Service company for Siemens SWT-3.2-108
Dismantling of wind power plants
Companies for deconstructionFurther operation
Find transport for wind energyCrane & Tower Crane
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine SWT-3.2-108 is a production of Siemens Wind Power A/S, a manufacturer from Denmark. This manufacturer has been in business since 2004. Since year 2017, Siemens Wind Power A/S is no longer active. The manufacturer was taken over by Siemens Gamesa Renewable Energy.
The rated power of Siemens SWT-3.2-108 is 3,20 MW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the Siemens SWT-3.2-108 is 108 m. The rotor area amounts to 9.144 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 16 U/min.
The Siemens SWT-3.2-108 is fittet with a with out. direct drive gearbox.
In the generator, Siemens Wind Power A/S sets to Synchronous permanent. The manufacturer has used one generator for the SWT-3.2-108. The maximum speed of the generator is 16 U/min. The voltage amounts to 690 V. At the mains frequency, the SWT-3.2-108 is at 50 Hz.
In the construction of the tower, the manufacturer uses tapered tubular. As corrosion protection for the tower Siemens focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the SWT-3.2-108 of Siemens are not stored in the system.
The Siemens SWT-3.2-108 has been listed since 04.07.2014.
The rated power of Siemens SWT-3.2-108 is 3,20 MW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the Siemens SWT-3.2-108 is 108 m. The rotor area amounts to 9.144 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 16 U/min.
The Siemens SWT-3.2-108 is fittet with a with out. direct drive gearbox.
In the generator, Siemens Wind Power A/S sets to Synchronous permanent. The manufacturer has used one generator for the SWT-3.2-108. The maximum speed of the generator is 16 U/min. The voltage amounts to 690 V. At the mains frequency, the SWT-3.2-108 is at 50 Hz.
In the construction of the tower, the manufacturer uses tapered tubular. As corrosion protection for the tower Siemens focuses on painted.
Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. Power data for the SWT-3.2-108 of Siemens are not stored in the system.
The Siemens SWT-3.2-108 has been listed since 04.07.2014.
More wind turbines
Siemens SWT-3.0-101
3,00 MW
Siemens SWT-3.0-108
3,00 MW
Siemens SWT-2.3-108
2,30 MW
Siemens SWT-2.3-93 Offshore
2,30 MW
Siemens SWT-4.0-120
4,00 MW
Siemens SWT-3.6-120 Onshore
3,60 MW
Siemens SWT-2.3-82
2,30 MW
Siemens SWT-3.2-113
3,20 MW
Siemens SWT-2.3-101
2,30 MW
Siemens SWT-3.3-130 LN
3,30 MW
Siemens SWT-6.0-120
6,00 MW
Siemens SWT-2.3-93
2,30 MW
Siemens SWT-3.3-130
3,30 MW
Siemens SWT-3.2-101
3,20 MW
Siemens SWT-3.6-130
3,60 MW
Siemens SWT-3.6-107 Onshore
3,60 MW
Siemens SWT-3.15-142
3,15 MW
Siemens SWT-2.3-93
2,30 MW
Siemens SWT-3.6-107 Offshore
3,60 MW
Siemens SWT-1.3-62
1,30 MW