Made - Endesa GESA AE-18 prototype

The wind turbine GESA AE-18 prototype is a production of Made - Endesa, a manufacturer from Spain. Since year 2003, Made - Endesa is no longer active. The manufacturer was taken over by Gamesa Corporación Tecnológica (Grupo Auxiliar MEtalurgico, SA).

The rated power of Made - Endesa GESA AE-18 prototype is 110,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Made - Endesa GESA AE-18 prototype is 18,96 m. The rotor area amounts to 282 m². The wind turbine is equipped with 3 rotor blades.

The Made - Endesa GESA AE-18 prototype is fittet with a spur gearbox.

In the generator, Made - Endesa sets to induction. The manufacturer has used 2 generators for the GESA AE-18 prototype. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 380 V. At the mains frequency, the GESA AE-18 prototype is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube. As corrosion protection for the tower Made - Endesa focuses on coated.

We have 21 pictures of this wind turbine. There are no models for this wind turbine. Power data for the GESA AE-18 prototype of Made - Endesa are not stored in the system.

The Made - Endesa GESA AE-18 prototype has been listed since 09.06.2014. The last modification of the master data was made on 16.02.2025.