WES 18/80

The wind turbine 18/80 is a production of WES Wind Energy Solutions BV , a manufacturer from Netherlands.

The rated power of WES 18/80 is 80,00 kW. At a wind speed of 3 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the WES 18/80 is 18 m. The rotor area amounts to 255 m². The wind turbine is equipped with 2 rotor blades. The maximum rotor speed is 120 U/min.

The WES 18/80 is fittet with a helical gearbox. The gearbox has 2 stages. Manufacturer of the transmission is Siemens / Flender.

In the generator, WES Wind Energy Solutions BV sets to induction. The manufacturer has used one generator for the 18/80. The maximum speed of the generator is 1.950 U/min. The voltage amounts to 400 V. At the mains frequency, the 18/80 is at 50 Hz.

In the construction of the tower, the manufacturer uses steel tube / lattice. As corrosion protection for the tower WES focuses on hot dip galvanised steel.

Unfortunately there are no photos available for this wind turbine. There are no models for this wind turbine. We have power data on the 18/80 from the WES in the system. You can see the powercurve in the diagram above.

The WES 18/80 has been listed since 25.03.2014. The last modification of the master data was made on 10.03.2024.