HIDROTIM EOLTIM 3/5 variant II

The wind turbine EOLTIM 3/5 variant II is a production of HIDROTIM SA, a manufacturer from Romania. This manufacturer has been in business since 1966. HIDROTIM SA is no longer active.

The rated power of HIDROTIM EOLTIM 3/5 variant II is 300,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the HIDROTIM EOLTIM 3/5 variant II is 30 m. The rotor area amounts to 707 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 50 U/min.

The HIDROTIM EOLTIM 3/5 variant II is fittet with a Spur gearbox. The gearbox has 3 stages. Manufacturer of the transmission is Renk.

In the generator, HIDROTIM SA sets to Asynchronus. The manufacturer has used 2 generators for the EOLTIM 3/5 variant II. The maximum speed of the generator is 1.550 U/min. The voltage amounts to 660 V. At the mains frequency, the EOLTIM 3/5 variant II is at 50 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower HIDROTIM focuses on painted.

We have 40 pictures of this wind turbine. There are no models for this wind turbine. Power data for the EOLTIM 3/5 variant II of HIDROTIM are not stored in the system.

The HIDROTIM EOLTIM 3/5 variant II has been listed since 02.12.2013. The last modification of the master data was made on 05.12.2013.