Kværner Turbin AB Näsudden II

The wind turbine Näsudden II is a production of Kværner Turbin AB, a manufacturer from Sweden. Kværner Turbin AB is no longer active.

The rated power of Kværner Turbin AB Näsudden II is 3,00 MW. At a wind speed of 6 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.

The rotor diameter of the Kværner Turbin AB Näsudden II is 80,5 m. The rotor area amounts to 5.093,4 m². The wind turbine is equipped with 2 rotor blades. The maximum rotor speed is 21 U/min.

The Kværner Turbin AB Näsudden II is fittet with a spur/planetary gearbox. The gearbox has 2 stages. Manufacturer of the transmission is Lohmann & Stolterfoht.

In the generator, Kværner Turbin AB sets to Asynchronus. The manufacturer has used one generator for the Näsudden II. The maximum speed of the generator is 1.542 U/min. The voltage amounts to 690 V. At the mains frequency, the Näsudden II is at 50 Hz.

In the construction of the tower, the manufacturer uses concrete/tubular steel on top. As corrosion protection for the tower Kværner Turbin AB focuses on painted.

There is one picture of the wind turbine Näsudden II. There are no models for this wind turbine. Power data for the Näsudden II of Kværner Turbin AB are not stored in the system.

The Kværner Turbin AB Näsudden II has been listed since 29.11.2013. The last modification of the master data was made on 10.01.2015.