Japan Steel Works J82-2.0
2,00
MW
- ✘ Power data
- ✘ Pictures
- ✔ 1 Model
Pictures
There are no pictures stored
Datasheet
Power
Rated power:
2,000.0 kW
Flexible power ratings:
-
Cut-in wind speed:
3.5 m/s
Rated wind speed:
13.0 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
70.0 m/s
Wind zone (DIBt):
-
Wind class (IEC):
-
Rotor
Diameter:
83.3 m
Swept area:
5,450.0 m²
Number of blades:
3
Rotor speed, max:
19.0 U/min
Tipspeed:
83 m/s
Type:
APX70
Material:
GFRE
Manufacturer:
Aerpac
Power density 1:
367.0 W/m²
Power density 2:
2.7 m²/kW
Gear box
Type:
with out. direct drive
Stages:
-
Ratio:
-
Manufacturer:
-
Generator
Type:
Synchronous permanent
Number:
1.0
Speed, max:
19.0 U/min
Voltage:
660.0 V
Grid connection:
IGBT
Grid frequency:
50.0 Hz
Manufacturer:
-
Tower
Hub height:
70.0 m
Type:
Steel tube
Shape:
conical
Corrosion protection:
painted
Manufacturer:
-
Weight
Single blade:
6.5 t
Hub:
22.7 t
Rotor:
42.0 t
Nacelle:
34.0 t
Tower, max:
145.0 t
Total weight:
221.0 t
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
1x Gamesa G80
used United States
1x Enercon E-82 E2 2.000
used Germany
3x Enercon E-82 E2 2.000
used, Year 2007, 78m Lithuania
45x MHI Vestas Offshore V117-4.2 MW
used, Year 1987, 42m United States
€ 35.000
1x Nordex N43
used, 40m Germany
1x Nordex N43
used, Year 1998 Germany
1x NEG Micon NM 48/750
used, Year 2000, 60m Germany
1x enair E30 PRO
used, Year 1995 Germany
1x Vestas V52
used, 74m Italy
1x Bonus B33/300
used, Year 1998, 40m Germany
1x Nordex N80 Alpha
used, Year 2000, 80m Germany
€ 120.000
3x Vestas V27
new Germany
1x Tacke TW 300
used, Year 1995, 50m Germany
€ 10.000
1x Wind World W5200/750
used, Year 1999, 74m Poland
€ 60.000
1x AN Bonus 150/30
used, Year 1994, 30m Switzerland
€ 1
1x NEG Micon NM 48/600
used, Year 1998 Poland
€ 24.000
1x NEG Micon NM 48/750
used Germany
1x NEG Micon NM 43/600
used, Year 1999, 43m Finland
1x DeWind D4 48/600
used
1x DeWind D6 62/1000
used, Year 2003 Germany
powered by wind-turbine.com
Service company for Japan Steel Works J82-2.0
Dismantling of wind power plants
Companies for deconstructionFurther operation
Find transport for wind energyCrane & Tower Crane
Companies for further operationInsurance
Find an insurer for your plantModels
Japan Steel Works J82-2.0
Desk
Description
The wind turbine J82-2.0 is a production of Japan Steel Works, LTD, a manufacturer from Japan.
The rated power of Japan Steel Works J82-2.0 is 2,00 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Japan Steel Works J82-2.0 is 83,3 m. The rotor area amounts to 5.450,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19,0 U/min.
The Japan Steel Works J82-2.0 is fittet with a with out. direct drive gearbox.
In the generator, Japan Steel Works, LTD sets to Synchronous permanent. The manufacturer has used one generator for the J82-2.0. The maximum speed of the generator is 19,0 U/min. The voltage amounts to 660,0 V. At the mains frequency, the J82-2.0 is at 50,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Japan Steel Works focuses on painted.
Unfortunately there are no photos available for this wind turbine. One model has been entered to the wind turbine. This is the Japan Steel Works J82-2.0 - Desk model. Power data for the J82-2.0 of Japan Steel Works are not stored in the system.
The Japan Steel Works J82-2.0 has been listed since 08.10.2011. The last modification of the master data was made on 14.02.2014.
The rated power of Japan Steel Works J82-2.0 is 2,00 MW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Japan Steel Works J82-2.0 is 83,3 m. The rotor area amounts to 5.450,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 19,0 U/min.
The Japan Steel Works J82-2.0 is fittet with a with out. direct drive gearbox.
In the generator, Japan Steel Works, LTD sets to Synchronous permanent. The manufacturer has used one generator for the J82-2.0. The maximum speed of the generator is 19,0 U/min. The voltage amounts to 660,0 V. At the mains frequency, the J82-2.0 is at 50,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Japan Steel Works focuses on painted.
Unfortunately there are no photos available for this wind turbine. One model has been entered to the wind turbine. This is the Japan Steel Works J82-2.0 - Desk model. Power data for the J82-2.0 of Japan Steel Works are not stored in the system.
The Japan Steel Works J82-2.0 has been listed since 08.10.2011. The last modification of the master data was made on 14.02.2014.
More wind turbines
RRB Energy Pawan Shakthi PS-600
600,00 kW
Clipper C89
2,50 MW
Vestas V126-3.3
3,30 MW
GE General Electric GE 1.6-82.5
1,60 MW
Hitachi, Ltd. HTW2.0-80
2,00 MW
EOLYS METRONOME 55
52,00 kW
C&F CF 75
75,00 kW
aerodyn SCD 6.0/140 advanced
6,00 MW
Enercon E-66/18.66
1,80 MW
AN Bonus 450/35
450,00 kW
Shanghai Electric W4800-146 /WE4800-146
4,80 MW
MOWEA Net
0,33 kW
MBB Messerschmitt Aeolus II
3,00 MW
Nordex N54 MKII
1,00 MW
ESPE FX EVO-32
60,00 kW
Hannevind Vindkraft 5.5kW
5,50 kW
TYHI - Taiyuan TZ3000/104
3,00 MW
S&G Engineering SG2500.131 DD
2,50 MW
PowerWind PW56
900,00 kW
ReGen Powertech VENSYS 77
1,50 MW