Clipper C93
2,50
MW
- ✘ Power data
- ✔ 1 Picture
- ✘ Models
Pictures
Datasheet
Power
Rated power:
2,500.0 kW
Flexible power ratings:
-
Cut-in wind speed:
4.0 m/s
Rated wind speed:
12.5 m/s
Cut-out wind speed:
25.0 m/s
Survival wind speed:
64.5 m/s
Wind zone (DIBt):
-
Wind class (IEC):
IIa
Rotor
Diameter:
93.0 m
Swept area:
6,793.0 m²
Number of blades:
3
Rotor speed, max:
15.5 U/min
Tipspeed:
75 m/s
Type:
45.2
Material:
Fiberglas
Manufacturer:
-
Power density 1:
368.0 W/m²
Power density 2:
2.7 m²/kW
Gear box
Type:
Spur
Stages:
2.0
Ratio:
-
Manufacturer:
-
Generator
Type:
Synchronous permanent
Number:
4.0
Speed, max:
1,133.0 U/min
Voltage:
690.0 V
Grid connection:
IGBT
Grid frequency:
60.0 Hz
Manufacturer:
-
Tower
Hub height:
80.0 m
Type:
Steel tube
Shape:
conical
Corrosion protection:
painted
Manufacturer:
-
Weight
Single blade:
-
Hub:
-
Rotor:
-
Nacelle:
-
Tower, max:
-
Total weight:
-
Miscellaneous
Installation:
-
Offshore:
No
Onshore:
Yes
Power curve
There are no power data deposited for this turbine.
Marketplace
powered by wind-turbine.com
Service company for Clipper C93
Dismantling of wind power plants
Companies for deconstructionFurther operation
Find transport for wind energyCrane & Tower Crane
Companies for further operationInsurance
Find an insurer for your plantModels
There are no models to this Windturbine.
Description
The wind turbine C93 is a production of Clipper Windpower, a manufacturer from United States.
The rated power of Clipper C93 is 2,50 MW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Clipper C93 is 93,0 m. The rotor area amounts to 6.793,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 15,5 U/min.
The Clipper C93 is fittet with a Spur gearbox. The gearbox has 2,0 stages.
In the generator, Clipper Windpower sets to Synchronous permanent. The manufacturer has used 4.0 generators for the C93. The maximum speed of the generator is 1.133,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the C93 is at 60,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Clipper focuses on painted.
There is one picture of the wind turbine C93. There are no models for this wind turbine. Power data for the C93 of Clipper are not stored in the system.
The Clipper C93 has been listed since 27.02.2013. The last modification of the master data was made on 26.04.2015.
The rated power of Clipper C93 is 2,50 MW. At a wind speed of 4,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.
The rotor diameter of the Clipper C93 is 93,0 m. The rotor area amounts to 6.793,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 15,5 U/min.
The Clipper C93 is fittet with a Spur gearbox. The gearbox has 2,0 stages.
In the generator, Clipper Windpower sets to Synchronous permanent. The manufacturer has used 4.0 generators for the C93. The maximum speed of the generator is 1.133,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the C93 is at 60,0 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Clipper focuses on painted.
There is one picture of the wind turbine C93. There are no models for this wind turbine. Power data for the C93 of Clipper are not stored in the system.
The Clipper C93 has been listed since 27.02.2013. The last modification of the master data was made on 26.04.2015.
More wind turbines
Clipper C89
2,50 MW
Clipper C89
2,50 MW
Clipper C100
2,50 MW
Clipper C96
2,50 MW
Clipper C99
2,50 MW
Shriram 250 T
250,00 kW
CSIC H52-850
850,00 kW
Riisager 22 kW Sonebjerg
22,00 kW
Hannevind Vindkraft 11kW
11,00 kW
Krasnovsky WIME D-30
100,00 kW
Goldwind GW 90/2500
2,50 MW
AMSC wt2000df TC IIIA
2,00 MW
Lagerwey LW 18/80
80,00 kW
Nordex N26
225,00 kW
Goldwind GW 77/1500
1,50 MW
Wincon W755/48
755,00 kW
Suzlon S.52-600
600,00 kW
Vestas V164-10.0
10,00 MW
Saba Niroo S47-660
660,00 kW
WES WES80
80,00 kW