GET Danwin 600/41
600,00 kW
- ✘ Power data
- ✔ 24 Pictures
- ✘ Models
Pictures
Datasheet
Power
| Rated power: | 600.0 kW |
| Flexible power ratings: | - |
| Cut-in wind speed: | 3.5 m/s |
| Rated wind speed: | 14.0 m/s |
| Cut-out wind speed: | 25.0 m/s |
| Survival wind speed: | 67.0 m/s |
| Wind zone (DIBt): | - |
| Wind class (IEC): | - |
Rotor
| Diameter: | 41.0 m |
| Swept area: | 1,320.0 m² |
| Number of blades: | 3 |
| Rotor speed, max: | 27.8 U/min |
| Tipspeed: | 60 m/s |
| Type: | LM 19.1 |
| Material: | GFK |
| Manufacturer: | LM Glasfieber |
| Power density 1: | 454.5 W/m² |
| Power density 2: | 2.2 m²/kW |
Gear box
| Type: | spur/planetary |
| Stages: | 3.0 |
| Ratio: | 1:54 |
| Manufacturer: | Flender/Valmet |
Generator
| Type: | Asynchronus |
| Number: | 1 |
| Speed, max: | 1,500.0 U/min |
| Voltage: | 690.0 V |
| Grid connection: | Thyristor |
| Grid frequency: | 50 Hz |
| Manufacturer: | Loher |
Tower
| Hub height: | 50/70 m |
| Type: | Steel tube |
| Shape: | conical |
| Corrosion protection: | painted |
| Manufacturer: | - |
Weight
| Single blade: | 2.0 t |
| Hub: | - |
| Rotor: | - |
| Nacelle: | 22.4 t |
| Tower, max: | 90.0 t |
| Total weight: | - |
Miscellaneous
| Installation: | - |
| Offshore: | No |
| Onshore: | Yes |
Power curve
There are no power data deposited for this turbine.
Marketplace
1x GET Danwin 225/27
used, Year 1998, 30m
€ 20.000
1x GET Danwin 225/29
used, Year 1998, 40m
€ 20
1x GET Danwin 225/27
used, Year 1998, 30m
€ 20.000
1x AN Bonus 600/44 MK IV
used, 42m Sweden
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
1x Enercon E-40/6.44
used, Year 2001, 48m
1x Bonus B44/600
used, Year 1998, 40m Netherlands
5x Nordtank NTK 600
used, Year 1995, 43m Poland
3x Enercon E-40/6.44
used, Year 2003, 78m Germany
€ 182.500
1x Made - Endesa AE-45
used, 41m Spain
€ 70.000
10x Gamesa G44
used, 80m Germany
€ 53.454
2x Jacobs 48/600
used, Year 2003, 65m Germany
2x TURBOWINDS T600-48
used, Year 2005, 65m Canada
€ 534.540
1x NEG Micon NM 48/600
used, Year 1998, 40m
2x NEG Micon NM 48/600
used, Year 2001, 45m Netherlands
€ 49.500
1x Enercon E-40/6.44
used, Year 1999, 65m Germany
€ 110.000
4x Bonus B44/600
used, Year 1999, 1m
3x Bonus B44/600
used, Year 1999, 58m Ukraine
1x TURBOWINDS T600-48
new, Year 1990, 60m United States
€ 54.000
1x Vestas V39-600
used, Year 2010, 45m India
powered by wind-turbine.com
Service company for GET Danwin 600/41
Models
There are no models to this Windturbine.
Description
The wind turbine 600/41 is a production of GET Gesellschaft für Energietechnik GmbH & Co. KG, a manufacturer from Germany.
The rated power of GET Danwin 600/41 is 600,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the GET Danwin 600/41 is 41 m. The rotor area amounts to 1.320 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 27,8 U/min.
The GET Danwin 600/41 is fittet with a spur/planetary gearbox. The gearbox has 3 stages. Manufacturer of the transmission is Flender/Valmet.
In the generator, GET Gesellschaft für Energietechnik GmbH & Co. KG sets to Asynchronus. The manufacturer has used one generator for the 600/41. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 690 V. At the mains frequency, the 600/41 is at 50 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower GET Danwin focuses on painted.
We have 24 pictures of this wind turbine. There are no models for this wind turbine. Power data for the 600/41 of GET Danwin are not stored in the system.
The GET Danwin 600/41 has been listed since 31.01.2013. The last modification of the master data was made on 24.03.2014.
The rated power of GET Danwin 600/41 is 600,00 kW. At a wind speed of 3,5 m/s, the wind turbine starts its work. the cut-out wind speed is 25 m/s.
The rotor diameter of the GET Danwin 600/41 is 41 m. The rotor area amounts to 1.320 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 27,8 U/min.
The GET Danwin 600/41 is fittet with a spur/planetary gearbox. The gearbox has 3 stages. Manufacturer of the transmission is Flender/Valmet.
In the generator, GET Gesellschaft für Energietechnik GmbH & Co. KG sets to Asynchronus. The manufacturer has used one generator for the 600/41. The maximum speed of the generator is 1.500 U/min. The voltage amounts to 690 V. At the mains frequency, the 600/41 is at 50 Hz.
In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower GET Danwin focuses on painted.
We have 24 pictures of this wind turbine. There are no models for this wind turbine. Power data for the 600/41 of GET Danwin are not stored in the system.
The GET Danwin 600/41 has been listed since 31.01.2013. The last modification of the master data was made on 24.03.2014.
More wind turbines
GET Danwin 225/27
225,00 kW
GET Danwin 225/29
225,00 kW
Meize New Energy MZ37.5
1,50 MW
Kleinwind GmbH Schachner Windrad SW5
5,00 kW
XZERES Wind 442SR
10,40 kW
Siemens SWT-3.2-108
3,20 MW
Danish Wind Turbines 22 kW
22,00 kW
Senvion 3.0M122
3,00 MW
CATUM CA-2.0 MW-WD R93
2,00 MW
Siemens Gamesa SG 2.1-122
2,10 MW
Nordtank NTK 450
450,00 kW
Ventis 04-05
5,00 kW
Enercon E-17
80,00 kW
Windharvester WH 45
45,00 kW
Ghrepower FD21-50
50,00 kW
MHI Vestas Offshore V117-4.2 MW
4,20 MW
PACWIND Aeolian
5,00 kW
Hannevind Vindkraft 11kW
11,00 kW
Vestas V90-1.8
1,80 MW
Kenersys K120 2.3MW
2,30 MW