Jacobs 57/1000

1,05 MW
  • ✘ Power data
  • ✔ 3 Pictures
  • ✘ Models




Rated power:1,050.0 kW
Flexible power ratings:-
Cut-in wind speed:3.0 m/s
Rated wind speed:13.0 m/s
Cut-out wind speed:25.0 m/s
Survival wind speed:55.8 m/s
Wind zone (DIBt):-
Wind class (IEC):-


Diameter:57.0 m
Swept area:2,552.0 m²
Number of blades:3
Rotor speed, max:23.0 U/min
Tipspeed:69 m/s
Type:A&R 57
Material:GFK / Epoxy
Manufacturer:Abeking & Rasmussen
Power density 1:411.4 W/m²
Power density 2:2.4 m²/kW

Gear box



Speed, max:1,500.0 U/min
Voltage:690.0 V
Grid connection:Thyristor
Grid frequency:50.0 Hz


Hub height:55/60/70 m
Type:Steel tube
Corrosion protection:coated


Single blade:-
Rotor:18.0 t
Nacelle:65.7 t
Tower, max:72.0 t
Total weight:160.0 t



Power curve

There are no power data deposited for this turbine.


2x Jacobs 48/600
used, Year 2003, 65m Germany
1x Jacobs 43/600
used, Year 1999, 60m Germany
€ 25.000
2x Jacobs 43/600
used, Year 1998, 60m Germany
1x Jacobs 43/600
used, Year 1998, 60m
€ 28.000
2x Enercon E-40/5.40
used, 50m Germany
€ 30.000
1x Wind World W2700
used United States
€ 48.000
1x AN Bonus 600/44 MK IV
used, 42m Sweden
1x Bonus B19/120
used, 23m Canada
€ 15.000
2x Enercon E-48
used, 50m Lithuania
1x General Electric GE 1.5s
used Moldova
6x Vestas V80-2.0
used Moldova
1x Nordex N90/2500
used, Year 2009, 80m Germany
€ 360.000
3x Nordtank NTK 600
used, Year 1997, 40m Netherlands
2x Bonus B54/1000
used, Year 1998, 70m Germany
€ 99.000
4x Vestas V44
used, Year 1996 Denmark
€ 80.000
1x Enercon E-32 / 300
€ 32.000
1x Vestas V47
used, Year 2001, 65m
2x Vestas V25
used, 30m Germany
3x Micon M 530
used, 30m Poland
8x Bonus B23/150 Gittermast
used, 30m Poland
powered by wind-turbine.com


There are no models to this Windturbine.


The wind turbine 57/1000 is a production of Jacobs Energie GmbH, a manufacturer from Germany. Since year 2001, Jacobs Energie GmbH is no longer active. The manufacturer was taken over by REpower Systems SE.

The rated power of Jacobs 57/1000 is 1,05 MW. At a wind speed of 3,0 m/s, the wind turbine starts its work. the cut-out wind speed is 25,0 m/s.

The rotor diameter of the Jacobs 57/1000 is 57,0 m. The rotor area amounts to 2.552,0 m². The wind turbine is equipped with 3 rotor blades. The maximum rotor speed is 23,0 U/min.

The Jacobs 57/1000 is fittet with a spur/planetary gearbox. The gearbox has 3,0 stages. Manufacturer of the transmission is Renk.

In the generator, Jacobs Energie GmbH sets to Asynchronus. The manufacturer has used one generator for the 57/1000. The maximum speed of the generator is 1.500,0 U/min. The voltage amounts to 690,0 V. At the mains frequency, the 57/1000 is at 50,0 Hz.

In the construction of the tower, the manufacturer uses Steel tube. As corrosion protection for the tower Jacobs focuses on coated. Manufacturer of the tower is Klotz/KGW/Welcon.

We have 3 pictures of this wind turbine. There are no models for this wind turbine. Power data for the 57/1000 of Jacobs are not stored in the system.

The Jacobs 57/1000 has been listed since 26.01.2013. The last modification of the master data was made on 11.04.2015.

More wind turbines

Jacobs 48/750
750,00 kW
Jacobs 48/600
600,00 kW
Jacobs MD 77
1,50 MW
Jacobs 41/500
500,00 kW
Jacobs 43/600
600,00 kW
Jacobs MD 70
1,50 MW
Leitwind LTW104 2500
2,50 MW
aerodyn aM 5.0/139
5,00 MW
Ratier-Figeac Darrieus
12,00 kW
bwu BWU 41-500
500,00 kW
Envision EN130-4.0
4,00 MW
General Electric Haliade 150-6MW
6,00 MW
REpower MM100/1.8
1,80 MW
Windey WD88-1500
1,50 MW
Nordtank NTK 22
22,00 kW
Enercon E-126 EP4
4,20 MW
Hannevind Vindkraft 11kW
11,00 kW
Südwind N 715
15,00 kW
Vestas V27 Rørtårn
225,00 kW
Gamesa G44
600,00 kW